Infiniti G35 (V35) Sedan. Manual — part 186
AV-516
< SYMPTOM DIAGNOSIS >
[BOSE AUDIO WITH NAVIGATION]
MULTI AV SYSTEM SYMPTOMS
Related to RGB image
Trouble diagnosis chart by symptom
Related to Voice control
Trouble diagnosis chart by symptom
Related to AUDIO
Trouble diagnosis chart by symptom
Possible route line is indicated
abnormally when camera im-
age is displayed.
“The steer. Angle Sensor” is turns ON at
“Connection Confirmation”of on board di-
agnosis item“Camera Cont.”turns ON.
Sensor signal 3 circuit
(
)
“The steering angle sensor” is turns ON
at “of connection Confirmation”of on
board diagnosis item“Camera
Cont.”does not turn ON.
• Sensor signal 1circuit
(
• Sensor signal 2 circuit
(
Symptoms
Check items
Probable malfunction location
Symptoms
Check items
Possible malfunction location / Action to take
RGB image is not shown.
• All RGB images are not shown.
• “Multi AV” is displayed on system se-
lection display when the CONSULT-
III is initialized.
Perform CONSULT-III self-diagnosis.
(
AV-347, "CONSULT - III Function"
)
• All RGB images are not shown.
• “Multi AV” is not displayed on system
selection screen when the CON-
SULT-III is initialized.
AV control unit power supply and ground circuit
(
AV-379, "AV CONTROL UNIT : Diagnosis Procedure"
Color of RGB image is not
proper.
Light blue (Cyan) tint
RGB signal (R: red) circuit
(
)
Purple (Magenta) tint
RGB signal (G: green) circuit
(
)
Screen looks yellowish
RGB signal (B: blue) circuit
(
)
RGB screen is rolling.
–
RGB synchronizing signal circuit
(
)
Symptoms
Check items
Probable malfunction location
The voice cannot be controlled
even if the voice control
screen is displayed
Voice sounds at “Voice Microphone Test”
of Confirmation/Adjustment mode
AV control unit (
)
Voice does not sound at “Voice Micro-
phone Test” of Confirmation/Adjustment
mode.
Microphone signal circuit
(
)
The voice cannot be controlled
(Voice control screen is not
displayed)
Steering switch's “SOURCE”, “MENU
UP”, “MENU DOWN switch works,”, “EN-
TER” but“
”it does not work.
Steering switch (
)
Steering switch's “SOURCE”, “MENU
UP”, “MENU DOWN”, “
”, “EN-
TER”switches do not work.
Steering switch signal A circuit
(
)
All steering switches do not work.
Steering switch signal GND circuit
(
)
Symptoms
Check items
Possible malfunction location / Action to take
The CD cannot be removed.
–
CD eject signal circuit (
)
It cannot be switched to CD
changer mode.
The CD changer magazine can be re-
moved
• Request signal circuit
• Communication signal circuit
The CD changer magazine cannot be
removed.
CD changer power supply and ground circuit
(
AV-382, "CD CHANGER : Diagnosis Procedure"
)
AV
MULTI AV SYSTEM SYMPTOMS
AV-517
< SYMPTOM DIAGNOSIS >
[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
N
A
O
P
Related to STEERING SWITCH
Trouble diagnosis chart by symptom
Related to AUXILIARY INPUT
NOTE:
Check that there is no malfunction of AUX equipment main body before performing a diagnosis.
Trouble diagnosis chart by symptom
Audio sound is not heard.
No sound from all speakers
• BOSE amp. power supply and ground circuit
(
AV-381, "BOSE AMP. : Diagnosis Procedure"
• Amp. ON signal
Sound is not heard from woofer.
• Sound signal woofer circuit
• Woofer amp. ON signal
Sound is not heard from center speaker.
Sound signal center speaker circuit
Sound is not heard only from the specif-
ic places (RH front, RH rear, LH front
and LH rear).
Sound signal circuit of suspect system
Only the sound of CD changer mode is
not heard
CD changer sound signal circuit
Symptoms
Probable malfunction location
None of the steering switch operations work.
Steering switch signal GND circuit
(
)
Only specified switch (1) cannot be operated
Steering switch (
Steering switch's “SOURCE”, “MENU UP”, “MENU
DOWN”,“
”, “ENTER”switches do not work.
Steering switch signal A circuit
(
)
Steering switch's “
”, “VOL UP”, “VOL DOWN”,
“
”switches do not work.
Steering switch signal B circuit
(
)
Symptoms
Check items
Possible malfunction location / Action to take
Symptoms
Check items
Probable malfunction location
No voice sound is heard when
AUX mode is selected.
Voice sound is heard when other modes
are selected.
AUX sound signal circuit (auxiliary input jacks to AV
control unit)
Image is not displayed when
AUX mode is selected.
Camera image is displayed.
AUX image signal circuit
(
AV-518
< SYMPTOM DIAGNOSIS >
[BOSE AUDIO WITH NAVIGATION]
NORMAL OPERATING CONDITION
NORMAL OPERATING CONDITION
Description
INFOID:0000000000964902
BASIC OPERATIONS
NOTE:
Locations stored in the Address Book and other memory functions may be lost if the vehicle's battery is dis-
connected or becomes discharged. If this occurs, service the vehicle's battery as necessary and re-enter the
information in the Address Book.
RELATED TO VOICE RECOGNITION
Related to basic operation
Related to item choice
The system should respond correctly to all voice commands without difficulty. If problems are encountered, fol-
low the solutions given in this guide for the appropriate error.
Where the solutions are listed b number, try each solution in turn, starting with number one, until the problem
is resolved.
Symptom
Possible cause
Possible solution
No image is displayed.
The brightness is at the lowest setting.
Adjust the brightness of the display.
The system in the video mode.
Push <DISC-AUX> to change the mode.
The display is turned off.
Push <Day/Night> to turn on the display.
No voice guidance is available. Or
The volume is too high or too low.
The volume is not set correctly, or it is turned off.
Adjust the volume of voice guidance.
Voice guidance is not provided for certain streets
(roads displayed in gray).
This is not a malfunction.
No map is displayed on the
screen.
A screen other than map screen is displayed.
Push <MAP>.
The screen is too dim. The move-
ment is slow.
The temperature in the interior of the vehicle is low.
Wait until the interior of the vehicle has
warmed up.
Some pixels in the display are
darker or brighter than others.
This condition is an inherent characteristic of liquid
crystal displays.
This is not a malfunction.
Some menu items cannot be se-
lected.
Some menu items become unavailable while the
vehicle is driven.
Park the vehicle in a safe location, and
then operate the navigation system.
Symptom
Possible cause
Possible solution
The system does not
recognize your com-
mand.
or
The system recognizes
your command incor-
rectly
The interior of the vehicle is too noisy.
Close the windows or have other occupants qui-
et.
The volume of your voice is too low.
Speak louder
The volume if your voice is too loud.
Speak softer
Your pronunciation is unclear
Speak clearly
You are speaking before the voice recognition made is
ready
Push and release “
” switch on the steering
switch, and speak a command after the tone
sounds
8 seconds or more have passed after you pushed and
released “
” switch on the steering switch.
Make sure to speak a command within 8 sec-
onds after you push and release “
” switch on
the steering switch.
Only a limited range od voice commands is usable for
each screen.
Use a correct voice command appropriate for the
current screen
The second of the fan od the air conditioner is too loud.
If the air conditioner is set to “Auto”, the fan
speed is automatically lowered and voice com-
mands can be recognized more easily.
Lower the fan speed as necessary or set the air
conditioner to “Auto”.
AV
NORMAL OPERATING CONDITION
AV-519
< SYMPTOM DIAGNOSIS >
[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
N
A
O
P
Related to telephone
The system should respond correctly to all voice commands without difficulty. If problems are encountered, try
the following solutions.
Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is
resolves.
RELATED TO AUDIO
• The majority of the audio malfunctions are the result of outside causes (bad CD/cassette, electromagnetic
interference, etc.). Check the symptoms below to diagnose the malfunction.
• The vehicle itself can be a source of noise if noise prevention parts or electrical equipment is malfunctioning.
Check if noise is caused and/or changed by engine speed, ignition switch turned to each position, and oper-
ation of each piece of electrical equipment, and then determine the cause.
NOTE:
• CD-R is not guaranteed to play because they can contain compressed audio (MP3, WMA) or could be incor-
rectly mastered by the customer on a computer.
• Check if the CDs carry the Compact Disc Logo. If not, the disc is not mastered to the “red book” Compact
Disc Standard and may not play.
Symptom/ error message
Solution
Displays “COMMAND NOT REC-
OGNIZED” or the system fails to
interpret the command correctly.
1. Ensure that the command format is valid.
2. Speak clearly without pausing between words and at a level appropriate to the ambient noise
level.
3. Ensure that the ambient noise level is not excessive, for example, windows open or defrost
on.
NOTE:
If it is too noisy to use the phone, it is likely that voice commands will not be recognized.
4. If optional words of the command have been omitted, then command should be tried with
these in place.
The system consistently selects
the wrong voicetag
1.Ensure that the voicetag requested matches what was originally stored. This can be confirmed
by giving the Addressbook Directory or Phone Directory command.
2. Replace one of the voicetags being confused with a different voicetag.
Symptom
Solution
System fails to interpret the com-
mand correctly.
1. Ensure that the command is valid.
2. Ensure that the command is spoken after the tone.
3. Speak clearly without pausing between words and at level appropriate to the ambient noise
level in the vehicle.
4.Ensure that the ambient noise level is not excessive (for example, windows open or defroster
on),
NOTE:
If it is too noisy to use the phone, it is likely that the voice commands will be recognized.
5. If more than one command was said at a time, try saying the commands separately.
6. If the system consistently fails to recognize commands, the voice training procedure should
be carried out to improve the recognition response for the speaker. See “Speaker adaptation
(SA) mode” earlier in this section. Refer to “OWNER’S MANUAL”.
The system consistently selects
the wrong voicetag
1.Ensure that the phone book entry name requested matches what was originally stored. This
can be confirmed by using the “List Names” command.
2. Replace one of the names being confused with a new name.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст