Infiniti G35 (V35) Sedan. Manual — part 985
PB-6
< ON-VEHICLE MAINTENANCE >
PARKING BRAKE SHOE
PARKING BRAKE SHOE
Inspection
INFOID:0000000000958483
Rotate the disc rotor and check for any drag.
PARKING BRAKE CONTROL
PB-7
< ON-VEHICLE REPAIR >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
ON-VEHICLE REPAIR
PARKING BRAKE CONTROL
PEDAL TYPE
PEDAL TYPE : Exploded View
INFOID:0000000000958484
PEDAL TYPE : Removal and Installation
INFOID:0000000000958485
REMOVAL
1.
Remove rear tires with power tool.
2.
Remove instrument driver lower panel. Refer to
IP-12, "Removal and Installation"
.
3.
Disconnect parking brake switch harness connector.
4.
Remove adjusting nut and loosen front cable.
5.
Remove device assembly.
6.
Remove center console. Refer to
IP-12, "Removal and Installation"
7.
Remove the heat insulator and center muffler. Refer to
EX-5, "Removal and Installation"
.
8.
Separate front cable from rear cable, and remove front cable.
9.
Remove parking brake shoe, and remove rear cable from toggle lever. Refer to
.
10. Remove rear cable mounting bolts and nuts, pull out rear cable from vehicle.
1.
Return spring
2.
Stopper rubber
3.
Device assembly
4.
Pedal pad
5.
Adjusting nut
6.
Parking brake switch
7.
Lock plate
8.
Front cable
9.
Equalizer
10. Spring
11. Pin
12. Rear cable (LH)
13. Rear cable (RH)
: Apply multi-purpose grease.
Refer to
for symbols not described on the above.
JPFIB0004GB
PB-8
< ON-VEHICLE REPAIR >
PARKING BRAKE CONTROL
INSTALLATION
Install in the reverse order of the removal.
PEDAL TYPE : Adjustment
INFOID:0000000000958486
ADJUSTMENT AFTER INSTALLATION
Adjust the parking brake pedal stroke. Refer to
PB-3, "PEDAL TYPE : Inspection and Adjustment"
LEVER TYPE
LEVER TYPE : Exploded View
INFOID:0000000000958487
LEVER TYPE : Removal and Installation
INFOID:0000000000958488
RMOVAL
1.
Remove rear tires with power tool.
2.
Remove center console. Refer to
IP-12, "Removal and Installation"
3.
Disconnect parking brake switch harness connector.
4.
Remove adjusting nut and loosen front cable.
5.
Remove device assembly.
6.
Remove the heat insulator and center muffler. Refer to
EX-5, "Removal and Installation"
.
7.
Separate front cable from rear cable, and remove front cable.
8.
Remove parking brake shoe, and remove rear cable from toggle lever. Refer to
.
9.
Remove rear cable mounting bolts and nuts, pull out rear cable from vehicle.
INSTALLATION
Install in the reverse order of the removal.
LEVER TYPE : Adjustment
INFOID:0000000000958489
ADJUSTMENT AFTER INSTALLATION
Adjust the parking brake lever stroke. Refer to
PB-4, "LEVER TYPE : Inspection and Adjustment"
1.
Adjusting nut
2.
Device assembly
3.
Front cable
4.
Rear cable (LH)
5.
Rear cable (RH)
6.
Pin
: Apply multi-purpose grease.
Refer to
for symbols not described on the above.
JPFIB0005GB
PARKING BRAKE SHOE
PB-9
< ON-VEHICLE REPAIR >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
PARKING BRAKE SHOE
Exploded View
INFOID:0000000000958490
Removal and Installation
INFOID:0000000000958491
REMOVAL
WARNING:
Clean any dust from the brake shoes and brake plates with a vacuum dust collector. Never blow with
compressed air.
1.
Remove rear tires with power tool.
2.
Remove disc rotor with parking brake completely in the released position. Refer to
PER ASSEMBLY (FRONT CALIPER 1 PISTON TYPE) : Removal and Installation"
(front caliper 1 piston
type),
BR-57, "BRAKE CALIPER ASSEMBLY (FRONT CALIPER 2 PISTON TYPE) : Removal and Instal-
(front caliper 2 piston type).
CAUTION:
• Put matching marks on the disc rotor and the wheel hub and bearing assembly when reusing the
disc rotor.
• Never drop disc rotor.
3.
If disc rotor cannot be removed, remove as follows:
a.
Fix the disc rotor with wheel nuts and remove the adjusting hole plug.
1.
Brake shoe
2.
Adjuster
3.
Adjuster spring
4.
Return spring
5.
Anti-rattle pin
6.
Retainer
7.
Anti-rattle spring
8.
Toggle lever
: Apply PBC (Poly Butyl Cuprysil) grease or silicone-based grease.
JPFIB0006ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст