Infiniti G35 (V35) Sedan. Manual — part 189
AV-528
< PRECAUTION >
[BOSE AUDIO WITH NAVIGATION]
PRECAUTIONS
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000000964903
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the SRS section.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
Precaution for Trouble Diagnosis
INFOID:0000000000964904
AV COMMUNICATION SYSTEM
• Do not apply voltage of 7.0 V or higher to the measurement terminals.
• Use the tester with its open terminal voltage being 7.0 V or less.
• Be sure to turn ignition switch OFF and disconnect the battery cable from the negative terminal before
checking the circuit.
Precaution for Harness Repair
INFOID:0000000000964905
AV COMMUNICATION SYSTEM
• Solder the repaired parts, and wrap with tape. [Frays of twisted line
must be within 110 mm (4.33 in).]
• Do not perform bypass wire connections for the repair parts. (The
spliced wire will become separated and the characteristics of
twisted line will be lost.)
PKIA0306E
PKIA0307E
AV
PREPARATION
AV-529
< PREPARATION >
[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
N
A
O
P
PREPARATION
PREPARATION
Commercial Service Tools
INFOID:0000000000964906
Tool name
Description
Power tool
Loosening bolts and nuts
PBIC0191E
AV-530
< ON-VEHICLE REPAIR >
[BOSE AUDIO WITH NAVIGATION]
AV CONTROL UNIT
ON-VEHICLE REPAIR
AV CONTROL UNIT
Exploded View
INFOID:0000000000964907
REMOVAL
.
DISASSEMBLY
Removal and Installation
INFOID:0000000000964908
REMOVAL
1.
Remove Display unit.
2.
Remove AV control unit with a unified meter and A/C amp. as a single unit from the body.
3.
Remove bracket screws, and then remove AV control unit.
INSTALLATION
Installation is the reverse order of removal.
1.
Unified meter and A/C amp.
2.
Bracket LH
3.
AV control unit
4.
Bracket RH
JSNIA0113ZZ
AV
DISPLAY UNIT
AV-531
< ON-VEHICLE REPAIR >
[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
N
A
O
P
DISPLAY UNIT
Exploded View
INFOID:0000000000964909
.
Removal and Installation
INFOID:0000000000964910
REMOVAL
1.
Remove cluster lid C. Refer to
.
2.
Remove display unit with bracket as a single unit.
INSTALLATION
Installation is the reverse order of removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст