Infiniti G35 (V35) Sedan. Manual — part 404
DLN-50
< ON-VEHICLE REPAIR >
[TRANSFER: ETX13B]
FRONT OIL SEAL
FRONT OIL SEAL
Exploded View
INFOID:0000000000957285
Removal and Installation
INFOID:0000000000957286
REMOVAL
1.
Remove the drain plug to drain the transfer fluid. Refer to
2.
Remove the front propeller shaft. Refer to
1.
Drive chain
2.
Front drive shaft rear bearing
3.
Front drive shaft
4.
Front drive shaft front bearing
5.
Sprocket
6.
Mainshaft
7.
Needle bearing
8.
Snap ring
9.
Mainshaft bearing
10. Front case
11.
Front oil seal
12. Mainshaft oil seal
13. Oil cover
14. Temperature sensor
15. Electric controlled coupling
16. Spacer
17. Snap ring
18. O-ring
19. Oil gutter
20. Drain plug
21. Baffle plate
22. Rear bearing
23. Snap ring
24. Spacer
25. Rear oil seal
26. Companion flange
27. Self-lock nut
28. Breather tube
29. Rear case
30. Harness bracket
31. Retainer
32. Filler plug
33. Gasket
PDIA0244E
FRONT OIL SEAL
DLN-51
< ON-VEHICLE REPAIR >
[TRANSFER: ETX13B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
3.
Remove front oil seal using a flat-bladed screwdriver.
CAUTION:
Never damage the front case and front drive shaft.
INSTALLATION
1.
Apply ATF to front oil seal, install it with a drift [SST:
ST27862000 (
—
)] until the end face of front case.
CAUTION:
• Never reuse front oil seal.
• When installing, never incline front oil seal.
2.
Install front propeller shaft. Refer to
3.
Install transfer fluid, check fluid level and for fluid leakage. Refer
to
PDIA0537J
SDIA1783E
DLN-52
< ON-VEHICLE REPAIR >
[TRANSFER: ETX13B]
REAR OIL SEAL
REAR OIL SEAL
Exploded View
INFOID:0000000000957287
Removal and Installation
INFOID:0000000000957288
REMOVAL
1.
Remove the rear propeller shaft. Refer to
1.
Drive chain
2.
Front drive shaft rear bearing
3.
Front drive shaft
4.
Front drive shaft front bearing
5.
Sprocket
6.
Mainshaft
7.
Needle bearing
8.
Snap ring
9.
Mainshaft bearing
10. Front case
11.
Front oil seal
12. Mainshaft oil seal
13. Oil cover
14. Temperature sensor
15. Electric controlled coupling
16. Spacer
17. Snap ring
18. O-ring
19. Oil gutter
20. Drain plug
21. Baffle plate
22. Rear bearing
23. Snap ring
24. Spacer
25. Rear oil seal
26. Companion flange
27. Self-lock nut
28. Breather tube
29. Rear case
30. Harness bracket
31. Retainer
32. Filler plug
33. Gasket
PDIA0244E
REAR OIL SEAL
DLN-53
< ON-VEHICLE REPAIR >
[TRANSFER: ETX13B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
2.
Remove self-lock nut of companion flange using flange wrench.
3.
Put matching mark on the end of the mainshaft. The mark
should be in line with the mark on the companion flange.
CAUTION:
For matching mark, use paint. Never damage mainshaft.
4.
Remove the companion flange using a puller.
CAUTION:
Never damage the companion flange.
5.
Remove the rear oil seal using the puller [SST: KV381054S0 (J-
34286)].
CAUTION:
Never damage the rear case.
INSTALLATION
SDIA2454E
SDIA2378E
SDIA1785E
SDIA1786E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст