Infiniti G35 (V35) Sedan. Manual — part 1339
TM-48
< DISASSEMBLY AND ASSEMBLY >
[6MT: FS6R31A]
TRANSMISSION ASSEMBLY
1.
Install 5th-6th shift fork to 5th-6th coupling sleeve.
2.
Install 5th-6th fork rod (reversal side) to 5th-6th shift fork.
3.
Using a pin punch to tap retaining pin into 5th-6th shift fork.
CAUTION:
Do not reuse retaining pin.
4.
Install 5th-6th fork rod to adapter plate.
5.
Install 5th-6th fork rod bracket to 5th-6th fork rod.
6.
Using a pin punch to tap retaining pin into 5th-6th fork rod
bracket.
CAUTION:
Do not reuse retaining pin.
7.
Install 5th-6th control lever to adapter plate and then tighten
mounting bolts to the specified torque.
CAUTION:
Set the projection upward.
8.
Apply recommended grease check balls and then install check
balls to adapter plate.
9.
Install reverse shift fork to reverse coupling sleeve.
10. Install reverse fork rod to reverse shift fork.
11. Using a pin punch to tap retaining pin into reverse shift fork.
CAUTION:
Do not reuse retaining pin.
PCIB0412E
PCIB0238E
PCIB0172E
PCIB0148E
SCIA1447E
TRANSMISSION ASSEMBLY
TM-49
< DISASSEMBLY AND ASSEMBLY >
[6MT: FS6R31A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
12. Apply recommended grease to interlock pin and interlock
plunger.
13. Install interlock pin and interlock plunger to adapter plate.
14. Install 1st-2nd shift fork to 1st-2nd coupling sleeve.
15. Install 1st-2nd fork rod to 1st-2nd shift fork.
16. Using a pin punch to tap retaining pin into 1st-2nd shift fork.
CAUTION:
Do not reuse retaining pin.
17. Install 3rd-4th shift fork to 3rd-4th coupling sleeve.
18. Install 3rd-4th fork rod (reversal side) to 3rd-4th shift fork.
19. Using a pin punch to tap retaining pin into 3rd-4th shift fork
(reversal side).
CAUTION:
Do not reuse retaining pin.
20. Apply recommended grease to interlock pin and check balls.
21. Install interlock pin and check balls to adapter plate.
22. Install 3rd-4th fork rod to adapter plate.
23. Install 3rd-4th fork rod bracket to 3rd-4th fork rod.
24. Using a pin punch to tap retaining pin into 3rd-4th fork rod
bracket.
CAUTION:
Do not reuse retaining pin.
PCIB0147E
PCIB0602E
PCIB0601E
PCIB0146E
PCIB0145E
TM-50
< DISASSEMBLY AND ASSEMBLY >
[6MT: FS6R31A]
TRANSMISSION ASSEMBLY
25. Apply recommended grease to check ball and then install check
ball and check ball spring into adapter plate.
26. Apply recommended sealant to threads of check ball plugs and
then tighten check ball plug to the specified torque.
• Use Genuine Silicone RTV or an equivalent. Refer to
15, "Recommended Chemical Products and Sealants"
.
CAUTION:
Remove old sealant and oil adhering to threads.
27. Install 3rd-4th control lever to adapter plate and then tighten
mounting bolts to the specified torque.
CAUTION:
• Make sure the top and bottom are oriented correctly.
• Do not drop shifter cap.
28. Apply recommended grease to check ball and then install check
balls and check ball springs into adapter plate.
29. Apply recommended sealant to threads of check ball plugs and
then tighten check ball plugs to the specified torque.
• Use Genuine Silicone RTV or an equivalent. Refer to
15, "Recommended Chemical Products and Sealants"
.
CAUTION:
Remove old sealant and oil adhering to threads.
30. Install striking rod to adapter plate.
31. Install striking lever to striking rod.
32. Using a pin punch to tap retaining pin into striking lever.
CAUTION:
Do not reuse retaining pin.
33. Install baffle plate to adapter plate and then tighten mounting
bolts to the specified torque.
PCIB0144E
PCIB1352E
PCIB0143E
PCIB0414E
PCIB0154E
TRANSMISSION ASSEMBLY
TM-51
< DISASSEMBLY AND ASSEMBLY >
[6MT: FS6R31A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
CASE AND EXTENSION
1.
Install counter front bearing to transmission case.
2.
Install oil gutter to transmission case.
3.
Install breather tube to transmission case.
CAUTION:
Do not reuse breather tube.
4.
Apply recommended sealant to transmission case adapter plate
mounting surface as shown in the figure.
• Use Genuine Silicone RTV or an equivalent. Refer to
15, "Recommended Chemical Products and Sealants"
.
CAUTION:
Remove old sealant adhering to the mounting surfaces.
Also remove any moisture, oil, or foreign material adhering
to both mounting surfaces.
5.
Place adapter plate in transmission case using a soft hammer to
tap adapter plate to install it into transmission case.
6.
Install snap ring to main drive gear bearing using snap ring pli-
ers.
CAUTION:
Do not reuse snap ring.
PCIB0436E
PCIB1373E
SCIA1436E
SCIA1532E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст