Infiniti G35 (V35) Sedan. Manual — part 944
MWI
MWI-3
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Reference Value . . . . . . . . . . . . . .
Wiring Diagram — BCM — . . . . . . . . ...
Fail Safe . . . . . . . . . . . . . . . ...
DTC Inspection Priority Chart . . . . . . . .
DTC Index . . . . . . . . . . . . . . .
IPDM E/R (INTELLIGENT POWER DISTRI-
BUTION MODULE ENGINE ROOM) . . . ...
Reference Value . . . . . . . . . . . . ...
Wiring Diagram — IPDM E/R — . . . . . . ...
Fail Safe . . . . . . . . . . . . . . . ...
DTC Index . . . . . . . . . . . . . . .
SYMPTOM DIAGNOSIS . . . . . . .
THE FUEL GAUGE POINTER DOES NOT
MOVE . . . . . . . . . . . . . . . ...
Description . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
THE METER CONTROL SWITCH IS INOPER-
ATIVE . . . . . . . . . . . . . . . ...
Description . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
THE OIL PRESSURE SWITCH DOES NOT
TURN ON . . . . . . . . . . . . . . ..
Description . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
THE OIL PRESSURE SWITCH DOES NOT
TURN OFF . . . . . . . . . . . . . .
Description . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
Description . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
Description . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
THE DOOR OPEN WARNING CONTINUES
DISPLAYING, OR DOES NOT DISPLAY . .
Description . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
THE TRUNK OPEN WARNING CONTINUES
DISPLAYING, OR DOES NOT DISPLAY . ...
Description . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
THE AMBIENT TEMPERATURE DISPLAY IS
INCORRECT . . . . . . . . . . . . ...
Description . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
NORMAL OPERATING CONDITION . . . .
COMPASS . . . . . . . . . . . . . . . ...
COMPASS : Description . . . . . . . . . .
INFORMATION DISPLAY . . . . . . . . . .
INFORMATION DISPLAY : Description . . . .
PRECAUTION . . . . . . . . . . .
AIR BAG (PATTERN 2) . . . . . . . . ..
ON-VEHICLE REPAIR . . . . . . . ...
COMBINATION METER . . . . . . . . .
Exploded View . . . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . ...
Disassembly and Assembly . . . . . . . . ...
UNIFIED METER AND A/C AMP. . . . . ...
Exploded View . . . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . ...
METER CONTROL SWITCH . . . . . . ..
Exploded View . . . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . ...
COMPASS . . . . . . . . . . . . . ...
Exploded View . . . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . ...
CLOCK . . . . . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . ...
MWI-4
< BASIC INSPECTION >
DIAGNOSIS AND REPAIR WORKFLOW
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work flow
INFOID:0000000000964325
DETAILED FLOW
1.
OBTAIN INFORMATION ABOUT SYMPTOM
Interview the customer to obtain as much information as possible about the conditions and environment under
which the malfunction occurred.
>> GO TO 2.
2.
CHECK SYMPTOM
• Check the symptom based on the information obtained from the customer.
• Check that any other malfunctions are present.
>> GO TO 3.
3.
CHECK ON BOARD DIAGNOSIS OPERATION
Check that the on board diagnosis function operates. Refer to
MWI-35, "Diagnosis Description"
Does the on board diagnosis function operate normally?
YES
>> GO TO 4.
NO
>> GO TO 6.
4.
CHECK CONSULT-III SELF-DIAGNOSIS RESULTS
Connect CONSULT-III and perform self-diagnosis. Refer to
MWI-37, "CONSULT-III Function (METER/M&A)"
.
Are self-diagnosis results normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning part and go to 7.
5.
NARROW DOWN THE MALFUNCTIONING PART BY SYMPTOM DIAGNOSIS
Perform symptom diagnosis and repair or replace the identified malfunctioning parts.
>> GO TO 7.
6.
CHECK COMBINATION METER POWER SUPPLY AND GROUND CIRCUITS
Inspect combination meter power supply and ground circuits. Refer to
Is inspection result OK?
YES
>> Replace combination meter and go to 7.
NO
>> Repair or replace malfunctioning part and go to 7.
7.
FINAL CHECK
Check that the combination meter operates normally.
Do they operate normally?
YES
>> INSPECTION END
NO
>> GO TO 1.
MWI
METER SYSTEM
MWI-5
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
N
A
O
P
FUNCTION DIAGNOSIS
METER SYSTEM
METER SYSTEM
METER SYSTEM : System Diagram
INFOID:0000000000964326
METER SYSTEM : System Description
INFOID:0000000000964327
COMBINATION METER
• The combination meter retrieves the information required for controlling the operations of the meters, indica-
tor lamps/warning lamps and information display from the communication signals from the unified meter and
A/C amp. and the signals from various switches and sensors.
• The combination meter incorporates a trip computer that displays warnings and messages on the informa-
tion display according to the information received from various units.
• The combination meter incorporates a buzzer function that sounds an audible alarm with the integrated
buzzer device. Refer to
WCS-4, "WARNING CHIME SYSTEM : System Description"
for further details.
• The combination meter integrates the meter circuit check function and the segment check function that
checks the information display operation.
UNIFIED METER AND A/C AMP.
• Receives information required by the combination meter from various units via CAN communication line and
transmits it to the combination meter with communication line.
• The unified meter and A/C amp. incorporates a power saving control function that reduces the power con-
sumption according to the vehicle status. Refer to
for details.
• The unified meter and A/C amp. incorporates a diagnosis function that allows the technician to perform diag-
noses with CONSULT-III.
JSNIA0030GB
MWI-6
< FUNCTION DIAGNOSIS >
METER SYSTEM
Between unified meter and A/C amp. and combination meter.
IPDM E/R
• IPDM E/R reads the ON/OFF signals of the oil pressure switch and transmits the oil pressure switch signal to
the unified meter and A/C amp. via BCM with the CAN communication line.
• IPDM E/R is equipped with the diagnosis function. It can perform the operation check of oil pressure warning
lamp with the auto active test and the diagnosis with CONSULT-III.
METER CONTROL FUNCTION LIST
X: Applicable
Unit
Communication line
Input from combination meter
Output to combination meter
Unified meter
and A/C amp.
Communication line
(METER <-> AMP.)
• Parking brake switch signal
• Washer level switch signal
• Meter day/night condition signal
• Illumination control switch signal
• Refuel status signal
• Low fuel warning lamp signal
• Odo data signal
• Vehicle speed signal
• Turn indicator signal
• High beam request signal
• Front fog light request signal
• Engine speed signal
• Fuel level sensor signal
• Engine coolant temperature signal
• A/T CHECK indicator signal
• Oil pressure switch signal
• Door switch signal
• Buzzer output signal
• AFS OFF indicator lamp signal
• Tire pressure signal
• AWD warning lamp signal
• VDC OFF indicator signal
• ABS warning lamp signal
• Brake warning lamp signal
• Malfunction indicator lamp signal
• 4WAS warning lamp signal
• Master warning signal
Communication line
(LCD <-> AMP.)
• Average fuel consumption reset signal
• Travel time reset signal
• Possible driving distance reset signal
• Average vehicle speed reset signal
• Select switch signal
• Enter switch signal
• Trip A/B reset switch signal
• Ambient air temperature display signal
• Shift position signal
• Meter display signal
• Door switch signal
• Trunk switch signal
• Fuel level sensor signal
• Parking brake switch signal
• Washer level switch signal
• Charge warning signal
• Instantaneous fuel consumption display
signal
• Ambient air temperature display signal
• Average fuel consumption display signal
• Average vehicle speed display signal
• Possible driving distance display signal
• Engine speed signal
• Vehicle speed signal
System
Description
Signal source
Via unified
meter and A/C
amp.
Meter/gauge
Speedometer
Receives vehicle speed signal and indicates vehi-
cle speed.
ABS actuator and elec-
tric unit (control unit)
X
Tachometer
Receives engine speed signal and indicates en-
gine speed.
ECM
X
Fuel gauge
Receives fuel level sensor signal and indicates
fuel level.
Fuel level sensor unit
X
Engine coolant tem-
perature gauge
Receives engine coolant temperature signal and
indicates coolant temperature.
ECM
X
Warning lamp/
indicator lamp
Oil pressure warning
lamp
Receives oil pressure warning lamp signal and il-
luminates warning lamp.
IPDM E/R
X
Master warning
Illuminates according to warning output on infor-
mation display.
—
X
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст