Infiniti G35 (V35) Sedan. Manual — part 1498
FRONT WIPER ARM
WW-85
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
Adjustment
INFOID:0000000000962673
WIPER BLADE POSITION ADJUSTMENT
Clearance between the end of cowl top cover and the top of wiper blade center.
Standard clearance
R
: 35.0
±
7.5 mm (1.38
±
0.295 in)
L
: 72.0
±
7.5 mm (2.83
±
0.295 in)
JPLIA0082ZZ
WW-86
< ON-VEHICLE REPAIR >
FRONT WIPER DRIVE ASSEMBLY
FRONT WIPER DRIVE ASSEMBLY
Exploded View
INFOID:0000000000962674
REMOVAL VIEW
DISASSEMBLY VIEW
Removal and Installation
INFOID:0000000000962675
REMOVAL
1.
Remove wiper arm. Refer to
WW-84, "Removal and Installation"
.
2.
Remove cowl top cover. Refer to
EXT-18, "Removal and Installation"
.
3.
Remove bolts from the front wiper drive assembly.
1.
Front wiper drive assembly
JPLIA0069ZZ
1.
Wiper linkage 1
2.
Shaft seal
3.
Front wiper motor
4.
Wiper frame
5.
Wiper linkage 2
: Multi
−
purpose grease or an equivalent.
JPLIA0070ZZ
FRONT WIPER DRIVE ASSEMBLY
WW-87
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
4.
Disconnect the front wiper motor connector.
5.
Remove front wiper drive assembly from the vehicle.
INSTALLATION
1.
Install the front wiper drive assembly to the vehicle.
2.
Connect the front wiper motor connector.
3.
Operate the front wiper to move it to the auto stop position.
4.
Install the cowl top cover. Refer to
EXT-18, "Removal and Installation"
5.
Attach wiper arms. Refer to
WW-84, "Removal and Installation"
Disassembly and Assembly
INFOID:0000000000962676
DISASSEMBLY
1.
Remove the wiper linkage 1 and 2 from the front wiper drive assembly.
CAUTION:
Do not bend the linkage or damage the plastic part of the ball joint when removing the wiper link-
age.
2.
Remove the front wiper motor mounting screws, and then remove the front wiper motor from the wiper
frame.
ASSEMBLY
1.
Connect the front wiper motor connector.
2.
Operate the front wiper to move it to the auto stop position.
3.
Disconnect the front wiper motor connector.
4.
Install front wiper motor to wiper frame.
5.
Install the wiper linkage 2 to the wiper motor and the wiper frame.
6.
Install the wiper linkage 1 to the wiper frame.
CAUTION:
• Do not drop front wiper motor or cause it to come into contact with other parts.
• Be careful for the grease condition at the wiper motor and wiper linkage joint (retainer). Apply
Multi
−
purpose grease or an equivalent if necessary.
WW-88
< ON-VEHICLE REPAIR >
FRONT WIPER AND WASHER SWITCH
FRONT WIPER AND WASHER SWITCH
Exploded View
INFOID:0000000000962677
.BCS- Combination switch component view
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст