Infiniti G35 (V35) Sedan. Manual — part 387
DOOR LOCK
DLK-209
< ON-VEHICLE REPAIR >
[INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
11. Remove the front gasket and rear gasket.
12. Remove the TORX bolts (T30), and remove the door lock assembly.
13. Remove the TORX bolt (T30) of the outside handle bracket.
14. While pulling outside handle bracket, slide toward rear of vehicle
to remove outside handle bracket.
15. Disconnect the door lock actuator connector and remove the door lock assembly.
16. Reach in to separate the outside handle cable connection.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
To install each rod, rotate the rod holder until a click is felt.
REAR DOOR LOCK
REAR DOOR LOCK : Exploded View
INFOID:0000000000961279
PIIB5811E
JMKIA0022ZZ
PIIB5814E
PIIB5815E
DLK-210
< ON-VEHICLE REPAIR >
[INTELLIGENT KEY SYSTEM]
DOOR LOCK
REAR DOOR LOCK : Removal and Installation
INFOID:0000000000961280
REMOVAL
1.
Remove the rear door finisher. Refer to
INT-10, "Removal and Installation"
.
2.
Disconnect the inside handle knob cable and lock knob cable
from the back side of the rear door finisher.
3.
Remove the rear door glass. Refer to
GW-19, "Removal and Installation"
4.
Remove door side grommet, and remove outside handle escutcheon bolt (TORX T30) from grommet
hole.
CAUTION:
1.
Inside handle cap
2.
Inside handle
3.
Outside handle escutcheon
4.
Outside handle
5.
Rear gasket
6.
Front gasket
7.
Outside handle bracket
8.
Door lock assembly
9.
Striker
10. Seal
11.
Lock knob cable
12. Inside handle knob cable
13. Outside handle cable
Refer to
for symbols in the figure.
JMKIA0023GB
JMKIA0024ZZ
DOOR LOCK
DLK-211
< ON-VEHICLE REPAIR >
[INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Do not forcibly remove the TORX bolts (T30).
5.
While pulling the outside handle, remove outside handle
escutcheon.
6.
While pulling outside handle, slide toward rear of vehicle to
remove outside handle.
7.
Remove the front gasket and rear gasket.
8.
Remove the TORX bolts (T30), remove the door lock assembly.
JMKIA0025ZZ
PIIB5809E
PIIB5810E
PIIB5811E
DLK-212
< ON-VEHICLE REPAIR >
[INTELLIGENT KEY SYSTEM]
DOOR LOCK
9.
Remove the TORX bolt (T30), and remove the outside handle
bracket.
10. While pulling outside handle, slide toward rear of vehicle to
remove outside handle.
11. Disconnect the door lock actuator connector and remove the door lock assembly.
12. Reach in to separate outside handle cable connection.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
To install each rod, rotate the rod holder until a click is felt.
JMKIA0026ZZ
PIIB5814E
PIIB5815E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст