Infiniti I30 (A33). Manual — part 89
SAT296DA
9.
Remove O-rings from servo piston retainer.
SAT297D
10. Remove D-rings from band servo piston.
INSPECTION
NHAT0171
Pistons, Retainers and Piston Stem
NHAT0171S01
I
Check frictional surfaces for abnormal wear or damage.
AAT884
Return Springs
NHAT0171S02
I
Check for deformation or damage.
I
Measure free length and outer diameter.
Inspection standard:
Refer to SDS, AT-389.
SAT297D
ASSEMBLY
NHAT0172
1.
Install D-rings to servo piston retainer.
I
Apply ATF to D-rings.
I
Pay attention to position of each O-ring.
GI
MA
EM
LC
EC
FE
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
REPAIR FOR COMPONENT PARTS
Band Servo Piston Assembly (Cont’d)
AT-353
AAT883
2.
Install band servo piston stem, band servo thrust washer, O/D
servo return spring and spring retainer to band servo piston.
SAT301D
3.
Place piston stem end on a wooden block. While pushing
servo piston spring retainer down, install E-ring.
SAT296DA
4.
Install O-rings to servo piston retainer.
I
Apply ATF to O-rings.
I
Pay attention to position of each O-ring.
SAT303D
5.
Install band servo piston assembly to servo piston retainer by
pushing it inward.
AAT881
6.
Install D-ring to O/D servo piston.
I
Apply ATF to D-ring.
REPAIR FOR COMPONENT PARTS
Band Servo Piston Assembly (Cont’d)
AT-354
AAT882
7.
Install O-rings to O/D servo piston retainer.
I
Apply ATF to O-rings.
I
Pay attention to position of each O-ring.
AAT886
8.
Install O/D servo piston to O/D servo piston retainer.
SAT865H
9.
Install band servo piston assembly and 2nd servo return spring
to transmission case.
I
Apply ATF to O-ring of band servo piston and transmis-
sion case.
AAT885
10. Install O/D servo piston assembly to transmission case.
I
Apply ATF to O-ring of band servo piston and transmis-
sion case.
AAT879
11. Install O/D servo piston retainer to transmission case.
Refer to AT-351.
GI
MA
EM
LC
EC
FE
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
REPAIR FOR COMPONENT PARTS
Band Servo Piston Assembly (Cont’d)
AT-355
Final Drive
COMPONENTS
NHAT0173
SAT706J
SMT505B
DISASSEMBLY
NHAT0174
1.
Remove final gear.
AAT662
2.
Press out differential side bearings.
I
Be careful not to mix up the right and left bearings.
REPAIR FOR COMPONENT PARTS
Final Drive
AT-356
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст