Infiniti I30 (A33). Manual — part 41
3
CHECK CONTROL VALVE
1. Disassemble control valve assembly. Refer to AT-312.
2. Check to ensure that:
I
Valve, sleeve and plug slide along valve bore under their own weight.
I
Valve, sleeve and plug are free from burrs, dents and scratches.
I
Control valve springs are free from damage, deformation and fatigue.
I
Hydraulic line is free from obstacles.
SAT367H
OK or NG
OK
©
GO TO 4.
NG
©
Repair control valve.
4
CHECK SHIFT UP (D
3
TO D
4
)
Does A/T shift from D
3
to D
4
at the specified speed?
OK or NG
OK
©
GO TO 5.
NG
©
Check control valve again. Repair or replace control valve assembly.
5
CHECK DTC
Perform Diagnostic Trouble Code (DTC) confirmation procedure, AT-157.
OK or NG
OK
©
INSPECTION END
NG
©
GO TO 11.
Check for proper lock-up.
GI
MA
EM
LC
EC
FE
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
DTC P0744 A/T TCC S/V FUNCTION (LOCK-UP)
Diagnostic Procedure (Cont’d)
AT-161
6
CHECK VALVE RESISTANCE
1. Remove control valve assembly. Refer to AT-280.
I
Line pressure solenoid valve
2. Check resistance to the terminal and ground.
SAT625J
OK or NG
OK
©
GO TO 8.
NG
©
Replace solenoid valve assembly.
7
CHECK VALVE OPERATION
1. Remove control valve assembly. Refer to AT-280.
I
Line pressure solenoid valve
2. Check solenoid valve by listening for its operating sound while applying battery voltage to the terminal and ground.
SAT626J
OK or NG
OK
©
GO TO 8.
NG
©
Replace solenoid valve assembly.
DTC P0744 A/T TCC S/V FUNCTION (LOCK-UP)
Diagnostic Procedure (Cont’d)
AT-162
8
CHECK CONTROL VALVE
1. Disassemble control valve assembly. Refer to AT-312.
2. Check line pressure circuit valves for sticking.
I
Pressure regulator valve
I
Pilot valve
I
Pressure modifier valve
SAT367H
OK or NG
OK
©
GO TO 9.
NG
©
Repair control valve.
9
CHECK SHIFT UP (D
3
TO D
4
)
Does A/T shift from D
3
to D
4
at the specified speed?
OK or NG
OK
©
GO TO 10.
NG
©
Check control valve again. Repair or replace control valve assembly.
10
CHECK DTC
Perform Diagnostic Trouble Code (DTC) confirmation procedure, AT-157.
OK or NG
OK
©
INSPECTION END
NG
©
GO TO 11.Check for proper lock-up.
11
CHECK LOCK-UP
During “Cruise test — Part 1” (AT-74), does A/T perform lock-up at the specified speed?
SAT989H
Yes or No
Yes
©
Perform “Cruise test — Part 1” again and return to the start point of this test group.
No
©
GO TO 12.
GI
MA
EM
LC
EC
FE
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
DTC P0744 A/T TCC S/V FUNCTION (LOCK-UP)
Diagnostic Procedure (Cont’d)
AT-163
12
CHECK VALVE RESISTANCE
1. Remove control valve assembly. Refer to AT-280.
I
Torque converter clutch solenoid valve
2. Check resistance to the terminal and ground.
SAT047KA
OK or NG
OK
©
GO TO 14.
NG
©
Replace solenoid valve assembly.
13
CHECK VALVE OPERATION
1. Remove control valve assembly. Refer to AT-280.
I
Torque converter clutch solenoid valve
2. Check solenoid valve by listening for its operating sound while applying battery voltage to the terminal and ground.
SAT037K
OK or NG
OK
©
GO TO 14.
NG
©
Replace solenoid valve assembly.
DTC P0744 A/T TCC S/V FUNCTION (LOCK-UP)
Diagnostic Procedure (Cont’d)
AT-164
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст