Infiniti I30 (A33). Manual — part 365
MEL428M
GI
MA
EM
LC
EC
FE
AT
AX
SU
BR
ST
RS
BT
HA
SC
IDX
INTERIOR, STEP, SPOT, VANITY MIRROR AND TRUNK ROOM LAMPS
Wiring Diagram — INT/L — (Cont’d)
EL-129
SEL975X
INTERIOR, STEP, SPOT, VANITY MIRROR AND TRUNK ROOM LAMPS
Wiring Diagram — INT/L — (Cont’d)
EL-130
SEF289X
CONSULT-II Inspection Procedure
=NHEL0213
“INT LAMP”/“BATTERY SAVER”
NHEL0213S01
1.
Turn ignition switch “OFF”.
2.
Connect “CONSULT-II” to the data link connector.
PBR455D
3.
Turn ignition switch “ON”.
4.
Touch “START”.
SEL941W
5.
Touch “SMART ENTRANCE”.
SEL351W
6.
Touch “INT LAMP” or “BATTERY SAVER”.
SEL322W
7.
Select diagnosis mode.
“DATA MONITOR” and “ACTIVE TEST” are available for “INT
LAMP” and “BATTERY SAVER”.
GI
MA
EM
LC
EC
FE
AT
AX
SU
BR
ST
RS
BT
HA
SC
IDX
INTERIOR, STEP, SPOT, VANITY MIRROR AND TRUNK ROOM LAMPS
CONSULT-II Inspection Procedure
EL-131
CONSULT-II Application Items
NHEL0214
“INT LAMP”
NHEL0214S01
Data Monitor
NHEL0214S0101
Monitored Item
Description
IGN ON SW
Indicates [ON/OFF] condition of ignition switch.
DOOR SW-RR
Indicates [ON/OFF] condition of ignition switch.
KEY ON SW
Indicates [ON/OFF] condition of key switch.
DOOR SW-DR
Indicates [ON/OFF] condition of front door switch LH.
DOOR SW-AS
Indicates [ON/OFF] condition of front door switch RH.
LOCK SW DR/AS
Indicates [ON/OFF] condition of front door lock switch.
UNLK SW DR/AS
Indicates [ON/OFF] condition of front door lock switch.
KEY CYL LK-SW
Indicates [ON/OFF] condition of front door key cylinder switch.
KEY CYL UN-SW
Indicates [ON/OFF] condition of front door key cylinder switch.
LK BUTTON/SIG
Indicates [ON/OFF] condition of unlock signal from remote controller.
UN BUTTON/SIG
Indicates [ON/OFF] condition of unlock signal from remote controller.
Active Test
NHEL0214S0102
Test Item
Description
INT LAMP
This test enables to check interior lamp operation.
When “ON” on CONSULT-II screen is touched:
I
Interior lamp turns on when the switch is at DOOR.
(Smart entrance control unit supplies power and ground to interior lamp.)
IGN ILLUM
This test enables to check ignition key hole illumination operation. The illumination turns on when
“ON” on CONSULT-II screen is touched.
STEP LAMP
This test enables to check step lamp operation.
The illumination turns on when “ON” on CONSULT-II screen is touched.
“BATTERY SAVER”
NHEL0214S02
Data Monitor
NHEL0214S0201
Monitored Item
Description
IGN ON SW
Indicates [ON/OFF] condition of ignition switch.
DOOR SW-RR
Indicates [ON/OFF] condition of ignition switch.
KEY ON SW
Indicates [ON/OFF] condition of key switch.
DOOR SW-DR
Indicates [ON/OFF] condition of front door switch LH.
DOOR SW-AS
Indicates [ON/OFF] condition of front door switch RH.
LOCK SW DR/AS
Indicates [ON/OFF] condition of front door lock switch.
UNLK SW DR/AS
Indicates [ON/OFF] condition of front door lock switch.
KEY CYL LK-SW
Indicates [ON/OFF] condition of front door key cylinder switch.
KEY CYL UN-SW
Indicates [ON/OFF] condition of front door key cylinder switch.
LK BUTTON/SIG
Indicates [ON/OFF] condition of unlock signal from remote controller.
UN BUTTON/SIG
Indicates [ON/OFF] condition of unlock signal from remote controller.
INTERIOR, STEP, SPOT, VANITY MIRROR AND TRUNK ROOM LAMPS
CONSULT-II Application Items
EL-132
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст