Infiniti I30 (A33). Manual — part 556
SMA922A
CALIPER
NHMA0026S02
Check for leakage.
SMA847B
PAD
NHMA0026S03
Check for wear or damage.
Unit: mm (in)
Brake model
CLZ25VC
CL9HB
Standard thickness
11 (0.43)
10 (0.39)
Minimum thickness
(Wear limit)
2.0 (0.079)
1.5 (0.059)
SMA654C
Checking Steering Gear and Linkage
NHMA0027
STEERING GEAR
NHMA0027S01
I
Check gear housing and boots for looseness, damage and
grease leakage.
I
Check connection with steering column for looseness.
STEERING LINKAGE
NHMA0027S02
Check ball joint, dust cover and other component parts for
looseness, wear, damage and grease leakage.
SST850C
Checking Power Steering Fluid and Lines
NHMA0028
Check fluid level in reservoir tank with engine off.
Use “HOT” range at fluid temperatures of 50 to 80°C (122 to 176°F)
or “COLD” range at fluid temperatures of 0 to 30°C (32 to 86°F).
CAUTION:
I
Do not overfill.
I
Recommended fluid is Genuine NISSAN PSF II or equiva-
lent.
Refer to “RECOMMENDED FLUIDS AND LUBRICANTS”,
MA-11.
SST851C
I
Check lines for improper attachment, leaks, cracks, damage,
loose connections, chafing and deterioration.
I
Check rack boots for accumulation of power steering fluid.
GI
EM
LC
EC
FE
AT
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
CHASSIS AND BODY MAINTENANCE
Checking Disc Brake (Cont’d)
MA-25
Lubricating Locks, Hinges and Hood Latches
NHMA0029
SMA081D
Checking Seat Belts, Buckles, Retractors,
Anchors and Adjusters
NHMA0030
SMA042DA
CHASSIS AND BODY MAINTENANCE
Lubricating Locks, Hinges and Hood Latches
MA-26
Engine Maintenance
BELT DEFLECTION AND TENSION
NHMA0031
Deflection adjustment
Unit: mm (in)
Tension adjustment*1
Unit: N (kg, lb)
Used belt
New belt
Used belt
New belt
Limit
After adjustment
Limit
After adjustment
Alternator
With air conditioner
compressor
7 (0.28)
4.2 - 4.6
(0.165 - 0.181)
3.7 - 4.1
(0.146 - 0.161)
294 (30, 66)
730 - 818
(74.5 - 83.5,
164 - 184)
838 - 926
(85.45 - 94.43,
188.4 - 208.2)
Without air condi-
tioner compressor
10 (0.39)
6.3 - 6.9
(0.248 - 0.272)
5.6 - 6.0
(0.220 - 0.236)
294 (30, 66)
730 - 818
(74.5 - 83.5,
164 - 184)
838 - 926
(85.45 - 94.43,
188.4 - 208.2)
Power steering oil pump
11 (0.43)
7.3 - 8
(0.287 - 0.315)
6.5 - 7.2
(0.256 - 0.283)
196 (20, 44)
495 - 583
(50.5 - 59.5,
111 - 131)
603 - 691
(61.5 - 70.5,
136 - 155)
Applied pushing force
98 N (10 kg, 22 lb)
—
*1: If the belt tension gauge cannot be installed at check points shown, check drive belt tension at a different location on the belt.
SPARK PLUG
NHMA0032
Platinum tipped type
Make
NGK
Type
Standard
PFR5G-11
Hot
PFR4G-11
Cold
PFR6G-11
Plug gap (Nominal)
1.1 mm (0.043 in)
Chassis and Body Maintenance
WHEEL BALANCE
NHMA0033
Maximum allowable unbalance
Dynamic (At rim flange)
10 g (0.35 oz) (one side)
Static
20 g (0.71 oz)
GI
EM
LC
EC
FE
AT
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
SERVICE DATA AND SPECIFICATIONS (SDS)
Engine Maintenance
MA-27
NOTES
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст