Infiniti QX56 (JA60). Manual — part 844
SEC-22
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
DIAGNOSIS SYSTEM (BCM)
IMMU : CONSULT-III Function (BCM - IMMU)
INFOID:0000000005281885
DATA MONITOR
ACTIVE TEST
THEFT ALM
THEFT ALM : CONSULT-III Function (BCM - THEFT ALM)
INFOID:0000000005370266
WORK SUPPORT
DATA MONITOR
ACTIVE TEST
Monitor Item
[Unit]
Description
IGN ON SW [ON/OFF]
Indicates condition of ignition switch in ON position.
Test Item
Description
THEFT IND
This test is able to check security indicator operation [ON/OFF].
Test Item
Description
SECURITY ALARM SET
This mode is able to confirm and change security alarm ON-OFF setting.
THEFT ALM TRG
The switch which triggered vehicle security alarm is recorded. This mode is able to confirm and
erase the record of vehicle security alarm. The trigger data can be erased by touching “CLEAR” on
CONSULT-III screen.
Monitor Item
[Unit]
Description
IGN ON SW [ON/OFF]
Indicates ignition switch (ON) status judged from IGN signal (ignition power supply)
ACC ON SW [ON/OFF]
Indicates ignition switch (ACC) status judged from ACC signal (accessory power supply)
I-KEY LOCK [ON/OFF]
Indicates lock signal status received from Intelligent Key unit by CAN communication
I-KEY UNLOCK [ON/OFF]
Indicates unlock signal status received from Intelligent Key unit by CAN communication
I-KEY TRUNK [ON/OFF]
Indicates condition of back door opener switch
TRNK OPNR SW [ON/OFF]
Indicates switch status of back door opener switch
TRNK OPN MNTR [ON/OFF]
Indicates switch status of back door latch
DOOR SW-DR [ON/OFF]
Indicates switch status input from front door switch LH
DOOR SW-AS [ON/OFF]
Indicates switch status input from front door switch RH
DOOR SW-RR [ON/OFF]
Indicates switch status input from rear door switch RH
DOOR SW-RL [ON/OFF]
Indicates switch status input from rear door switch LH
BACK DOOR SW [ON/OFF]
Indicates switch status input from back door switch
KEY CYL LK-SW [ON/OFF]
Indicates lock switch status from door key cylinder switch
KEY CYL UN-SW [ON/OFF]
Indicates unlock switch status from door key cylinder switch
CDL LOCK SW [ON/OFF]
Indicates lock switch status from door lock and unlock switch
CDL UNLOCK SW [ON/OFF]
Indicates unlock switch status from door lock and unlock switch
Test Item
Description
THEFT IND
This test is able to check security indicator lamp operation. The lamp will be turned on when “ON”
on CONSULT-III screen is touched.
DIAGNOSIS SYSTEM (BCM)
SEC-23
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
VEHICLE SECURITY HORN
This test is able to check vehicle security horn operation. The horns will be activated for 0.5 sec-
onds after “ON” on CONSULT-III screen is touched.
HEADLAMP(HI)
This test is able to check vehicle security lamp operation. The headlamps will be activated for 0.5
seconds after “ON” on CONSULT-III screen is touched.
Test Item
Description
SEC-24
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
DIAGNOSIS SYSTEM (INTELLIGENT KEY UNIT)
DIAGNOSIS SYSTEM (INTELLIGENT KEY UNIT)
CONSULT-III Function (INTELLIGENT KEY)
INFOID:0000000005282423
APPLICATION ITEM
CONSULT-III performs the following functions via CAN communication with Intelligent Key unit.
SELF-DIAG RESULT
DATA MONITOR
Diagnosis mode
Function Description
WORK SUPPORT
Changes the setting for each system function.
SELF-DIAG RESULTS
Displays the diagnosis results judged by Intelligent Key unit.
CAN DIAG SUPPORT MNTR
Monitors the reception status of CAN communication viewed from Intelligent Key unit.
DATA MONITOR
The Intelligent Key unit input/output signals are displayed.
ACTIVE TEST
The signals used to activate each device are forcibly supplied from Intelligent Key unit.
ECU IDENTIFICATION
The Intelligent Key unit part number is displayed.
Monitor Item
Condition
PUSH SW
Indicates [ON (pushed)/OFF (released)] condition of ignition knob switch.
KEY SW
Indicates [ON (inserted)/OFF (removed)] condition of key switch.
DR REQ SW
Indicates [ON (pressed)/OFF (released)] condition of door request switch (driver side).
AS REQ SW
Indicates [ON (pressed)/OFF (released)] condition of door request switch (passenger
side).
BD/TR REQ SW
This item is shown but not monitored.
IGN SW
Indicates [ON (ON or START position)/OFF (other than ON and START position)] con-
dition of ignition switch ON position.
ACC SW
Indicates [ON/OFF] condition of ignition switch ACC position.
STOP LAMP SW
Indicates [ON/OFF] condition of stop lamp switch.
P RANGE SW
Indicates [ON/OFF] position of shift lever park position switch.
BD OPEN SW
This item is shown but not monitored.
TR CANCEL SW
This item is shown but not monitored.
DOOR LOCK SIG
Indicates [ON/OFF] condition of LOCK signal from Intelligent Key.
DOOR UNLOCK SIG
Indicates [ON/OFF] condition of UNLOCK signal from Intelligent Key.
KEYLESS TRUNK SW
This item is shown but not monitored.
KEYLESS PANIC SW
Indicates [ON (pressed)/OFF (released)] condition of Intelligent Key panic button.
KEYLS PSD LH
This item is shown but not monitored.
KEYLS PSD RH
This item is shown but not monitored.
KEYLS PBD SIG
Indicates [ON (pressed)/OFF (released)] condition of Intelligent Key back door button.
DOOR SW DR
Indicates [OPEN/CLOSE] condition of front door switch (driver side) from BCM via CAN
communication.
DOOR SW AS
Indicates [OPEN/CLOSE] condition of front door switch (passenger side) from BCM via
CAN communication.
DOOR SW RR
Indicates [OPEN/CLOSE] condition of rear door switch (RH) from BCM via CAN com-
munication.
DOOR SW RL
Indicates [OPEN/CLOSE] condition of rear door switch (LH) from BCM via CAN com-
munication.
DOOR BK SW
Indicates [OPEN/CLOSE] condition of back door switch from BCM via CAN communi-
cation.
DIAGNOSIS SYSTEM (INTELLIGENT KEY UNIT)
SEC-25
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
ACTIVE TEST
TRUNK SW
This item is shown but not monitored.
VEHICLE SPEED
Displays the vehicle speed signal received from combination meter by numerical value
[km/h].
Monitor Item
Condition
Test item
Description
DOOR LOCK/UNLOCK
This test is able to check door lock/unlock operation.
• ALL UNLK: All door lock actuators are unlocked.
• DR UNLK: Door lock actuator (driver side) is unlocked.
• AS UNLK: Door lock actuator (passenger side) is unlocked.
• BK UNLK: This item is indicated, but inactive.
• LOCK: All door lock actuator is locked.
ANTENNA
This test is able to check Intelligent Key antenna operation.
When the following condition are met, hazard warning lamps flash.
• ROOM ANT1: Inside key antenna (front of center console) detects Intelligent Key,
when “ROOM ANT1” is selected.
• ROOM ANT2: Inside key antenna (rear luggage area) detects Intelligent Key, when
“ROOM ANT2”is selected.
• ROOM ANT3: Inside key antenna (rear of center console) detects Intelligent Key,
when “ROOM ANT3” is selected.
• ROOM ANT4: Inside key antenna (roof console) detects Intelligent Key, when
“ROOM ANT4”is selected.
• DRIVER ANT: Outside key antenna (driver side) detects Intelligent Key, when “DRIV-
ER ANT” is selected.
• ASSIST ANT: Outside key antenna (passenger side) detects Intelligent Key, when
“ASSIST ANT” is selected.
• BK DOOR ANT: Outside key antenna (rear bumper) detects Intelligent Key, when “BK
DOOR ANT” is selected.
OUTSIDE BUZZER
This test is able to check Intelligent Key warning buzzer operation.
• ON
• OFF
INSIDE BUZZER
This test is able to check warning chime in combination meter operation.
• TAKE OUT: Take away warning chime sounds.
• KNOB: Ignition knob switch warning chime sounds.
• KEY: Key warning chime sounds.
• OFF
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст