Infiniti G35 (V35). Manual — part 459
BODY SIDE TRIM
EI-31
C
D
E
F
G
H
J
K
L
M
A
B
EI
BODY SIDE TRIM
PFP:76913
Removal and Installation
NIS000GZ
CAUTION:
Wrap the tip of flat-bladed screwdriver with a cloth when removing metal clips from garnishes.
REAR SIDE FINISHER
Removal
1.
Remove kicking plate.
2.
Remove body side welt.
3.
Remove rear side finisher.
Installation
Install in the reverse order of removal.
1.
Rear pillar garnish
2.
Body side welt
3.
Front pillar garnish
4.
Dash side finisher
5.
Center mud guard finisher
6.
Kicking plate
7.
Rear side finisher
8.
Cap
PIIA3574E
EI-32
BODY SIDE TRIM
REAR PILLAR GARNISH
Removal
1.
Remove rear seat cushion. Refer to
.
2.
Remove front seat belt shoulder anchor bolts. Refer to
3.
Remove rear seat belt floor anchor bolts. Refer to
4.
Remove kicking plate.
5.
Remove body side welt.
6.
Remove rear side finisher.
7.
Remove rear pillar garnish.
Installation
Install in the reverse order of removal.
FRONT PILLAR GARNISH
Removal
1.
Remove kicking plate.
2.
Remove body side welt.
3.
Remove front pillar garnish.
Installation
Install in the reverse order of removal.
KICKING PLATE
Removal
Remove kicking plate.
Installation
Install in the reverse order of removal.
CENTER MUD GUARD FINISHER
Removal
Remove center mud guard finisher.
Installation
Install in the reverse order of removal.
DASH SIDE FINISHER
Removal
1.
Remove kicking plate.
2.
Remove body side welt.
3.
Remove dash side finisher.
NOTE:
Insert screw driver rolled with cloth between panel on vehicle and
clips (as indicated with arrow), and disconnect clips.
Installation
Install in the reverse order of removal.
NOTE:
To install, check if all clips are matched over holes of panel on vehicle, then push on.
SIIA0810E
REAR PARCEL SHELF FINISHER
EI-33
C
D
E
F
G
H
J
K
L
M
A
B
EI
REAR PARCEL SHELF FINISHER
PFP:79910
Removal and Installation
NIS000H0
REMOVAL
1.
Remove rear seat. Refer to
2.
Remove kicking plate. Refer to
3.
Remove body side welt. Refer to
4.
Remove front seat belt floor shoulder anchor bolts. Refer to
5.
Remve rear seat belt floor anchor bolts. Refer to
6.
Remove rear side finisher. Refer to
7.
Remove rear pillar garnish. Refer to
8.
Remove rear seatback striker cover.
9.
Remove clips of rear parcel shelf finisher.
10. Remove child anchor cover .
11. Remove high-mounted stop lamp and electrical parts connector.
12. Remove rear parcel shelf finisher.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
●
Confirm hooks of rear parcel shelf finisher are completely inserted into holes on vehicle side.
●
Confirm clips are matched over holes on vehicle side, then push on.
PIIA3575E
1.
Rear parcel shelf finisher
2.
Rear seatback trim
3.
Rear seatback welt
4.
Child anchor cover
5.
High-mounted stop lamp
6.
Rear seatback striker cover
EI-34
FLOOR TRIM
FLOOR TRIM
PFP:74902
Removal and Installation
NIS000H1
REMOVAL
1.
The battely terminal is removed and waits for three minutes.
2.
Remove front seat and rear seat cushion. Refer to
SE-134, "Removal and Installation"
.
3.
Remove instrument side panel (left and right). Refer to
IP-10, "INSTRUMENT PANEL ASSEMBLY"
.
4.
Remove center console. Refer to
IP-10, "INSTRUMENT PANEL ASSEMBLY"
5.
Remove kicking plate. Refer to
6.
Remove body side welt. Refer to
.
7.
Remove rear side finisher. Refer to
8.
Remove dash side finisher. Refer to
9.
Remove screw of foot-rest and remove plate.
10. Turn flat-bladed screw driver in counter-clockwise, and remove
foot-rest from stud bolts on vehicle.
11. Remove foot-rest.
12. Remove front seat belt floor anchor bolts. Refar to
13. Remove air bag cpu assembly braket. Refar to
.
PIIA3581E
1.
Foot-rest (driver)
2.
Foot-grille (left)
3.
Carpet hook
4.
Floor carpet
5.
Foot-grille (right)
PIIA3243E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст