Infiniti G35 (V35). Manual — part 159
POWER DOOR LOCK SYSTEM
BL-23
C
D
E
F
G
H
J
K
L
M
A
B
BL
When the door is unlocked with door key cylinder switch, ground is supplied
●
to power window main switch (door lock and unlock switch) terminal 7
●
through door key cylinder switch terminals 6 and 5
●
through grounds M30 and M66.
Then door key cylinder switch operation signal is supplied
●
to BCM terminal 22
●
through power window main switch (door lock and unlock switch) terminal 12.
POWER WINDOW SERIAL LINK
BCM is connected to power window main switch (door lock and unlock switch) and power window sub-switch
(door lock and unlock switch) as serial link.
Power window main switch, power window sub-switch and BCM transmit and receive the signal by power win-
dow serial link.
The under mentioned signal is transmitted from power window main switch to BCM.
●
Door lock and unlock switch signal.
The under mentioned signal is transmitted from power window sub-switch to BCM.
●
Door lock and unlock switch signal.
OUTLINE
Functions Available by Operating the Door Lock and Unlock Switches on Driver's Door and
Passenger's Door
●
With the locking operation of door lock and unlock switch, driver side door lock actuator, passenger side
door lock actuator and fuel lid lock actuator are locked.
●
With the unlocking operation of door lock and unlock switch, driver side door lock actuator, passenger side
door lock actuator and fuel lid lock actuator are unlocked.
Functions Available by Operating the Key Cylinder Switch
●
With the locking operation of door key cylinder, driver side door lock actuator, passenger side door lock
actuator and fuel lid lock actuator are locked.
●
When door key cylinder is unlocked, driver side door lock actuator and fuel lid lock actuator are unlocked.
●
When door key cylinder is unlocked for the second time within 5 seconds after the first operation, passen-
ger side door lock actuator is unlocked.
Unlock mode can be changed using “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT”.
Refer to
.
Key Reminder Door System
When door lock and unlock switch is operated to lock doors with ignition key put in key cylinder and driver's or
passenger's door open, driver and passenger door lock actuators are locked and then unlocked.
Key reminder door mode can be changed using “ANTI-LOCK OUT SET” in “WORK SUPPORT”.
Refer to
.
CAN Communication System Description
NIS000B3
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle mul-
tiplex communication line with high data communication speed and excellent error detection ability. Many elec-
tronic control units are equipped onto a vehicle, and each control unit shares information and links with other
control units during operation (not independent). In CAN communication, control units are connected with 2
communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring.
Each control unit transmits/receives data but selectively reads required data only.
CAN Communication Unit
NIS000B4
Refer to
LAN-47, "CAN System Specification Chart"
.
BL-24
POWER DOOR LOCK SYSTEM
Schematic/With Intelligent Key
NIS000B5
TIWM1458E
POWER DOOR LOCK SYSTEM
BL-25
C
D
E
F
G
H
J
K
L
M
A
B
BL
Wiring Diagram —D/LOCK—/With Intelligent Key
NIS000B6
TIWM1459E
BL-26
POWER DOOR LOCK SYSTEM
TIWM1460E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст