Infiniti G35 (V35). Manual — part 71
DISASSEMBLY
AT-275
D
E
F
G
H
I
J
K
L
M
A
B
AT
62. Remove reverse brake piston from transmission case with com-
pressed air. Refer to
CAUTION:
Care should be taken not to abruptly blow air. It makes pis-
tons incline, as the result, it becomes hard to disassemble
the pistons.
63. Remove D-rings from reverse brake piston.
64. Use a pin punch [4 mm (0.16 in) dia. commercial service tool] to
knock out retaining pin.
65. Remove manual shaft retaining pin with pair of nippers.
SCIA5047E
SCIA5340E
SCIA2328E
SCIA2329E
AT-276
DISASSEMBLY
66. Remove manual plate (with parking rod) from manual shaft.
67. Remove parking rod from manual plate.
68. Remove manual shaft from transmission case.
69. Remove manual shaft oil seals using a flat-bladed screwdriver.
CAUTION:
Be careful not to scratch transmission case.
70. Remove detent spring and spacer from transmission case.
SCIA5715E
SCIA5220E
SCIA5716E
SCIA2331E
SCIA5248E
DISASSEMBLY
AT-277
D
E
F
G
H
I
J
K
L
M
A
B
AT
71. Using pair of snap ring pliers, remove snap ring from transmis-
sion case.
72. Remove servo assembly (with return spring) from transmission
case.
73. Remove return spring from servo assembly.
74. Remove O-rings from servo assembly.
75. Remove needle bearing (1) from rear extension.
SCIA2333E
SCIA5679E
SCIA5717E
SCIA5719E
SCIA6179J
AT-278
DISASSEMBLY
76. Remove parking actuator support from rear extension.
77. Remove parking pawl (with return spring) and pawl shaft from
rear extension.
78. Remove return spring (1) from parking pawl (2).
79. Remove rear oil seal from rear extension.
CAUTION:
Be careful not to scratch rear extension.
SCIA3423E
SCIA3424E
SCIA6180J
SCIA3524E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст