Infiniti G35 (V35). Manual — part 771
SRS-46
FRONT PASSENGER AIR BAG MODULE
FRONT PASSENGER AIR BAG MODULE
PFP:K8515
Removal and Installation
NHS00020
REMOVAL
CAUTION:
●
Before servicing SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3
minutes.
●
Always work from the side of front passenger air bag module.
●
Do not use air tools or electric tools for servicing.
1.
Remove instrument panel & pad. Refer to
IP-10, "INSTRUMENT PANEL ASSEMBLY"
2.
Remove hex bolt, then remove front passenger air bag module.
CAUTION:
●
Always place front passenger air bag module with deployment side facing upward.
●
Do not insert any foreign objects (screwdriver, etc.) into front passenger air bag module.
●
Do not disassemble front passenger air bag module.
●
Do not use old bolts after removal; replace with new bolts.
●
Replace front passenger air bag module if it has been
dropped or sustained an impact.
●
Do not expose the front passenger air bag module to tem-
peratures exceeding 90
°
C (194
°
F).
●
Do not allow oil, grease or water to come in contact with the
front passenger air bag module.
●
After front passenger air bag module inflates, the instru-
ment panel assembly should be replaced.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
●
Always work from the side of or under front passenger air bag module.
●
After the work is completed, perform self-diagnosis to make sure no malfunction is detected.
Refer to
Hex bolt (M8)
:
24.5 N·m (2.5 kg-m, 18 ft-lb)
Fixing bolt (M6)
:
6 N·m (0.6 kg-m, 53 in-lb)
PHIA0929E
SBF814E
SIDE CURTAIN AIR BAG MODULE
SRS-47
C
D
E
F
G
I
J
K
L
M
A
B
SRS
SIDE CURTAIN AIR BAG MODULE
PFP:985P0
Removal and Installation
NHS00021
REMOVAL
CAUTION:
●
Before servicing SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3
minutes.
●
Do not use air tools or electric tools for servicing.
1.
EI-36, "Removal and Installation"
2.
Disconnect side curtain air bag connector.
3.
Remove side curtain air bag module fixing bolts, and remove the side curtain air bag module.
CAUTION:
●
Always place the side curtain air bag module with the warn-
ing label facing upward.
●
Do not disassemble side curtain air bag module.
●
Do not insert any foreign objects (screwdriver, etc.) into air
bag module connector.
●
Replace side curtain air bag module if it has been dropped
or sustained an impact.
●
Do not expose the air bag module to temperatures exceed-
ing 90
°
C (194
°
F).
●
Do not allow oil, grease or water to come in contact with the
side curtain air bag module.
PHIA0662E
1.
Bolt
PHIA0230E
SBF814E
SRS-48
SIDE CURTAIN AIR BAG MODULE
INSTALLATION
Install in the reverse order of removal.
CAUTION:
●
Always work from the side of the side curtain air bag module.
●
After replacement of side curtain air bag module, perform self-diagnosis to make sure that no mal-
function is detected. Refer to
CRASH ZONE SENSOR
SRS-49
C
D
E
F
G
I
J
K
L
M
A
B
SRS
CRASH ZONE SENSOR
PFP:98531
Removal and Installation
NHS00022
REMOVAL
CAUTION:
●
Before servicing SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3
minutes.
●
Do not use air tools or electric tools for servicing.
1.
Remove crash zone sensor connector.
2.
Remove crash zone sensor fixing nuts.
CAUTION:
●
Replace crash zone sensor if it has been dropped or sustained an impact.
●
Do not disassemble crash zone sensor.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
●
Check crash zone sensor for proper installation.
●
After the work is complete, perform self-diagnosis to make sure that no malfunction is detected.
Refer to
PHIA0225E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст