Infiniti G35 (V35). Manual — part 268
COMBINATION METERS
DI-19
C
D
E
F
G
H
I
J
L
M
A
B
DI
Removal and Installation for Combination Meter
NKS000KT
REMOVAL
1.
Remove steering column cover. Refer to
IP-10, "INSTRUMENT PANEL ASSEMBLY"
.
2.
Remove lighting and turn signal switch. Refer to
LT-91, "LIGHTING AND TURN SIGNAL SWITCH"
.
3.
Remove front wiper and washer switch. Refer to
WW-37, "Removal and Installation of Front Wiper and
4.
Remove instrument lower driver panel. Refer to
IP-10, "INSTRUMENT PANEL ASSEMBLY"
5.
Remove the screws (4) and remove cluster lid A and combination meter assembly. Refer to
6.
Disconnect connectors and remove combination meter.
7.
Remove the screw (1) and remove Intelligent Key warning
buzzer (with Intelligent Key).
8.
Remove the screws (9) and disassemble cluster lid A and combination meter.
INSTALLATION
Installation is the reverse order of removal.
PKIB2680E
PKIB2681E
DI-20
COMBINATION METERS
Disassembly and Assembly for Combination Meter
NKS000KU
DISASSEMBLY
1.
Disengage the tabs (8) to separate front cover and upper housing assembly.
2.
Disengage the tabs (8) to separate front cover.
ASSEMBLY
Assembly is the reverse order of disassembly.
1.
Unified meter control unit assembly
2.
Upper housing
3.
Front cover
PKIB2682E
WARNING LAMPS
DI-21
C
D
E
F
G
H
I
J
L
M
A
B
DI
WARNING LAMPS
PFP:24814
System Description
NKS000R0
OIL PRESSURE WARNING LAMP
Oil pressure warning lamp turns ON when engine oil pressure reducing abnormally.
●
IPDM E/R reads oil pressure switch signal from oil pressure switch, and transmits the signal to combina-
tion meter with CAN communication.
●
Combination meter turns oil pressure warning lamp ON with received oil pressure switch signal.
SKIB4797E
DI-22
WARNING LAMPS
Schematic
NKS000L5
TKWM3480E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст