Infiniti G35 (V35). Manual — part 115
DUCTS AND GRILLES
ATC-131
C
D
E
F
G
H
I
K
L
M
A
B
ATC
DUCTS AND GRILLES
PFP:27860
Removal and Installation
NJS0004B
COMPONENT LAYOUT
REMOVAL
Removal of Center Ventilator Grilles
1.
Remove instrument driver lower panel. Refer to
IP-10, "INSTRUMENT PANEL ASSEMBLY"
2.
Remove mounting screw, and then remove center ventilator grill
(left).
3.
Remove center box assembly. Refer to
IP-10, "INSTRUMENT PANEL ASSEMBLY"
4.
Remove mounting screws, clips, and then remove center venti-
lator grille (right).
1.
Defroster grille (right)
2.
Side defroster duct (right)
3.
Defroster nozzle
4.
Side defroster duct (left)
5.
Side ventilator duct (left)
6.
Defroster grille (left)
7.
Side defroster grille (left)
8.
Side ventilator grille (left)
9.
Center ventilator grille (left)
10. Center ventilator grille (right)
11. Side ventilator grille (right)
12. Side defroster grille (right)
13. Instrument panel & pad
14. Side ventilator duct (right)
15. Center ventilator duct
RJIA3587E
RJIA3588E
RJIA3589E
ATC-132
DUCTS AND GRILLES
Removal of Side Ventilator Grilles
1.
Remove center box assembly. Refer to
IP-10, "INSTRUMENT PANEL ASSEMBLY"
.
2.
Remove mounting screw and clips, and then remove side venti-
lator grille (right).
3.
Remove instrument driver lower panel. Refer to
4.
Remove side ventilator grille (left).
Removal of Defroster Nozzle, Ducts and Ventilator Ducts
1.
Remove instrument panel & pad. Refer to
IP-10, "INSTRUMENT PANEL ASSEMBLY"
2.
Remove mounting screws, and then remove side defroster ducts.
3.
Remove defroster nozzle.
4.
Remove mounting screws, and then remove center ventilator duct.
5.
Remove steering member, and then remove side ventilator ducts.
Removal of Side Defroster Grilles
Remove mounting clips, and then remove side defroster grilles.
RJIA0958E
RJIA1620E
RJIA3590E
DUCTS AND GRILLES
ATC-133
C
D
E
F
G
H
I
K
L
M
A
B
ATC
Removal of Foot Ducts
1.
Remove heater & cooling unit assembly. Refer to
ATC-124, "HEATER & COOLING UNIT ASSEMBLY"
.
2.
Remove mounting screws, and then remove evaporator cover
and foot duct (passenger side).
3.
Remove foot duct (driver side).
Removal of Floor Ducts
1.
Remove front seats and center console. Refer to
and
2.
Peel back floor trim to a point where floor duct is visible.
3.
Remove mounting clip, and then remove floor ducts.
4.
Remove instrument panel & pad. Refer to
IP-10, "INSTRUMENT PANEL ASSEMBLY"
5.
Remove front floor duct.
INSTALLATION
Installation is basically the reverse order of removal.
RJIA0962E
RJIA3758E
RJIA3591E
ATC-134
REFRIGERANT LINES
REFRIGERANT LINES
PFP:92600
HFC-134a (R-134a) Service Procedure
NJS0004C
SETTING OF SERVICE TOOLS AND EQUIPMENT
Discharging Refrigerant
WARNING:
Avoid breathing A/C refrigerant and lubricant vapor or mist. Exposure may irritate eyes, nose and
throat. Remove HFC-134a (R-134a) from A/C system using certified service equipment meeting
requirements of SAE J-2210 [HFC-134a (R-134a) recycling equipment] or J-2209 [HFC-134a (R-134a)
recovery equipment]. If accidental system discharge occurs, ventilate work area before resuming ser-
vice. Additional health and safety information may be obtained from refrigerant and lubricant manu-
facturers.
Evacuating System and Charging Refrigerant
WJIA0614E
WJIA0615E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст