Infiniti G35 (V35). Manual — part 708
RFD-58
REAR FINAL DRIVE ASSEMBLY
17. Using the drift, drive side oil seals until it becomes flush with the
case end.
CAUTION:
●
Do not reuse oil seal.
●
When installing, do not incline oil seal.
●
Apply multi-purpose grease onto oil seal lips, and gear
oil onto the circumference of oil seal.
18. Check and adjust drive gear runout, tooth contact, drive gear to
drive pinion backlash, and total preload torque. Refer to
and
RFD-40, "Total Preload Torque"
.
Recheck above items. Readjust the above description, if necessary.
19. Apply sealant to mating surface of rear cover.
●
Use Genuine Silicone RTV or equivalent. Refer to
"Recommended Chemical Products and Sealants"
.
CAUTION:
Remove old sealant adhering to mounting surfaces. Also
remove any moisture, oil, or foreign material adhering to
application and mounting surfaces.
20. Install rear cover on gear carrier and tighten mounting bolts with
the specified torque. Refer to
21. Install side flange with the following procedure.
NOTE:
Install the RH side flange, then install the LH side flange. If LH side flange is installed first, the RH side
flange comes out sometimes from the shock of installing the RH side flange.
a.
Attach the protector to side oil seal.
b.
After the side flange is inserted and the serrated part of side
gear has engaged the serrated part of flange, remove the pro-
tector.
c.
Put a suitable drift on the center of side flange, then drive it until
sound changes.
NOTE:
When installation is completed, driving sound of the side flange
turns into a sound which seems to affect the whole final drive.
d.
Confirm that the dimension of the side flange installation (Mea-
surement A) in the figure comes into the following.
Tool number
: KV38100200 (J-26233)
Tool number
: KV38107900 (J-39352)
SPD560
PDIA0961E
SDIA0822E
Measurement A: 326 – 328 mm (12.83 – 12.91 in)
PDIA0644E
SERVICE DATA AND SPECIFICATIONS (SDS)
RFD-59
C
E
F
G
H
I
J
K
L
M
A
B
RFD
SERVICE DATA AND SPECIFICATIONS (SDS)
PFP:00030
General Specifications
NDS0001R
Inspection and Adjustment
NDS0001S
DRIVE GEAR RUNOUT
DIFFERENTIAL SIDE GEAR CLEARANCE
PRELOAD TORQUE
BACKLASH
COMPANION FLANGE RUNOUT
Applied model
VQ35DE
A/T
M/T
Final drive model
R200
R200V (With LSD)
Gear ratio
3.538
Number of teeth (Drive gear/Drive pinion)
46/13
Oil capacity (Approx.)
(US pt, lmp pt)
1.4 (3, 2-1/2)
Number of pinion gears
2
4
Drive pinion adjustment spacer type
Collapsible
Item
Runout limit
Drive gear back face
0.05 mm (0.0020 in) or less
Item
Specification
R200
R200V (With LSD)
Side gear backlash
(Clearance between side gear and differential case)
0.2 mm (0.008 in) or less
(Each gear should rotate smoothly
without excessive resistance during
differential motion.)
0.15 mm (0.0059 in) or less
(Each gear should rotate smoothly
without excessive resistance during
differential motion.)
Item
Specification
Pinion bearing (P
1
)
2.65 – 3.23 N·m (0.27 – 0.32 kg-m, 24 – 28 in-lb)
Side bearing (P
2
)
0.20 – 0.52 N·m (0.02 – 0.05 kg-m, 2 – 4 in-lb)
Side bearing to pinion bearing (Total preload)
(Total preload = P
1
+ P
2
)
2.85 – 3.75 N·m (0.29 – 0.38 kg-m, 26 – 33 in-lb)
Item
Specification
Drive gear to drive pinion gear
0.10 – 0.15 mm (0.0039 – 0.0059 in)
Item
Runout limit
Companion flange face
0.08 mm (0.0031 in) or less
Inner side of the companion flange
0.08 mm (0.0031 in) or less
RFD-60
SERVICE DATA AND SPECIFICATIONS (SDS)
SELECTIVE PARTS
Side Gear Thrust Washer
Unit: mm (in)
*: Always check with the Parts Department for the latest parts information.
Pinion Height Adjusting Washer
Unit: mm (in)
*: Always check with the Parts Department for the latest parts information.
Side Bearing Adjusting Washer
Unit: mm (in)
*: Always check with the Parts Department for the latest parts information.
R200
R200V
Thickness
Part number*
Thickness
Part number*
Thickness
Part number*
0.75 (0.0295)
0.78 (0.0307)
0.81 (0.0319)
0.84 (0.0331)
0.87 (0.0343)
0.90 (0.0350)
0.93 (0.0366)
38424 EC000
38424 EC001
38424 EC002
38424 EC003
38424 EC004
38424 EC005
38424 EC006
0.80 (0.0315)
0.83 (0.0327)
0.86 (0.0339)
0.89 (0.0350)
0.92 (0.0362)
0.95 (0.0374)
0.98 (0.0386)
1.01 (0.0398)
1.04 (0.0409)
1.07 (0.0421)
1.10 (0.0433)
1.13 (0.0445)
38424 40F60
38424 40F61
38424 40F62
38424 40F63
38424 40F64
38424 40F65
38424 40F66
38424 40F67
38424 40F68
38424 40F69
38424 40F70
38424 40F71
1.16 (0.0457)
1.19 (0.0469)
1.22 (0.0480)
1.25 (0.0492)
1.28 (0.0504)
1.31 (0.0516)
1.34 (0.0528)
1.37 (0.0539)
1.40 (0.0551)
1.43 (0.0563)
1.46 (0.0575)
1.49 (0.0587)
38424 40F72
38424 40F73
38424 40F74
38424 40F75
38424 40F76
38424 40F77
38424 40F78
38424 40F79
38424 40F80
38424 40F81
38424 40F82
38424 40F83
R200, R200V
Thickness Part
number*
Thickness Part
number*
3.05 (0.1201)
3.08 (0.1213)
3.11 (0.1224)
3.14 (0.1236)
3.17 (0.1248)
3.20 (0.1260)
3.23 (0.1272)
3.26 (0.1283)
38154 0C000
38154 0C001
38154 0C002
38154 0C003
38154 0C004
38154 0C005
38154 0C006
38154 0C007
3.29 (0.1295)
3.32 (0.1307)
3.35 (0.1319)
3.38 (0.1331)
3.41 (0.1343)
3.44 (0.1354)
3.47 (0.1366)
3.50(0.1378)
38154 0C008
38154 0C009
38154 0C010
38154 0C011
38154 0C012
38154 0C013
38154 0C014
38154 0C015
R200, R200V
Thickness
Part number*
Thickness
Part number*
2.00 (0.0787)
2.05 (0.0807)
2.10 (0.0827)
2.15 (0.0846)
2.20 (0.0866)
2.25 (0.0886)
2.30 (0.0906)
38453 N3100
38453 N3101
38453 N3102
38453 N3103
38453 N3104
38453 N3105
38453 N3106
2.35 (0.0925)
2.40 (0.0945)
2.45 (0.0965)
2.50 (0.0984)
2.55 (0.1004)
2.60 (0.1024)
2.65 (0.1043)
38453 N3107
38453 N3108
38453 N3109
38453 N3110
38453 N3111
38453 N3112
38453 N3113
RSU-1
REAR SUSPENSION
E SUSPENSION
CONTENTS
C
D
F
G
H
I
J
K
L
M
SECTION
A
B
RSU
REAR SUSPENSION
PRECAUTIONS . . . . . . . . . . . . . . .. 2
Cautions . . . . . . . . . . . . . . . . ... 2
PREPARATION . . . . . . . . . . . . . . ... 3
Special Service Tools . . . . . . . . . . . ... 3
Commercial Service Tools . . . . . . . . . . 3
NOISE, VIBRATION AND HARSHNESS (NVH)
TROUBLESHOOTING . . . . . . . . . . . . 4
NVH Troubleshooting Chart . . . . . . . . . . 4
REAR SUSPENSION ASSEMBLY . . . . . . . . 5
On-Vehicle Inspection . . . . . . . . . . . .. 5
Wheel Alignment Inspection . . . . . . . . . . 5
Components . . . . . . . . . . . . . . . . 7
Removal and Installation . . . . . . . . . . .. 8
REMOVAL . . . . . . . . . . . . . . . . 8
INSTALLATION . . . . . . . . . . . . . . 8
SHOCK ABSORBER . . . . . . . . . . . . .. 9
Removal and Installation . . . . . . . . . . .. 9
Disassembly and Assembly . . . . . . . . . . 9
SUSPENSION ARM . . . . . . . . . . . . .. 11
Removal and Installation . . . . . . . . . . 11
RADIUS ROD . . . . . . . . . . . . . . . 13
Removal and Installation . . . . . . . . . . 13
FRONT LOWER LINK . . . . . . . . . . . .. 14
Removal and Installation . . . . . . . . . . 14
REAR LOWER LINK & COIL SPRING . . . . . . 15
Removal and Installation . . . . . . . . . . 15
STABILIZER BAR . . . . . . . . . . . . . . 16
Removal and Installation . . . . . . . . . . 16
REAR SUSPENSION MEMBER . . . . . . . ... 17
Removal and Installation . . . . . . . . . . 17
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст