Volkswagen Golf / Golf GTI / Jetta. Manual — part 1081
27-66
Installing
Install in reverse order of removal,
noting the following:
- Remove bolts -1- and -2-.
- Take starter out downward.
- Install and torque all starter bolts
and terminal nuts to values
specified in table
Page 27-70
.
- When reinstalling battery, torque
all bolts and terminal nuts to
values specified in table
Page
27-60
.
Starter
13/2/2005
27-67
Starter - vehicles with automatic transmission
09A, removing
Note:
Components in engine compartment may appear
different than illustrated. Removal procedure still
applies.
- Remove engine cover.
- Disconnect battery (note fuse holder type)
Page 27-39
.
- Remove intake hose -1- and disconnect
electrical connection -2-.
- Remove hose -3- from Mass Air Flow (MAF)
Sensor where applicable.
- Remove hose from air filter housing to
secondary air injection pump where applicable.
- Remove screws -4- and -5- and remove air filter
housing.
Starter
13/2/2005
27-68
Note:
Starter can be removed without prior
removal of battery and battery
mounting. For clarity, the following
illustrations show the battery
removed.
CAUTION!
- Remove bracket -arrow- from
transmission.
- Ensure transmission selector is in
"Park" and pry shifter cable end -
1- from shifter lever -4- using
screwdriver.
- Unclip shifter cable from holder -
3- lift out shifter cable and set
aside.
Do not remove screw -2-.
Do not kink shifter cable.
- Remove plastic cap -1- from
solenoid.
Starter
13/2/2005
27-69
- Remove nut at solenoid terminal
30 and remove cable -1-.
- Disconnect electrical connection
at starter terminal 50 -2-.
Installing
Install in reverse order of removal,
noting the following:
- Remove bolts -1- and -2-.
- Lift starter up and out from
transmission.
- Install and torque all starter bolts
and terminal nuts to values
specified in table
Page 27-70
.
- When reconnecting battery,
torque terminal nuts to values
specified in table
Page 27-60
.
Starter
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст