Volkswagen Golf / Golf GTI / Jetta. Manual — part 1080
27-62
Starter, removing and installing
CAUTION!
Before beginning repairs on the electrical
system:
Obtain the anti-theft radio security code.
Switch off all electrical consumers.
Switch ignition off and remove ignition
key.
Disconnect negative ( - ) battery terminal.
When disconnecting and reconnecting
battery terminals, observe all applicable
Notes and torque specifications, as well as
instructions on performing OBD program
and electrical system function checks as
specified in this Repair Manual
Page 27-
39
.
Starter
13/2/2005
27-63
Special tools and auxiliary items
needed
VAG 1331 Torque wrench (or
equivalent 5 - 50 Nm)
Vehicles with manual
transmission or automatic
transmission 01M
Page 27-64
.
Vehicles with automatic
transmission 09A
Page 27-67
.
VAG 1332 Torque wrench (or
equivalent 40 - 200 Nm)
Starter
13/2/2005
27-64
Starter - vehicles with manual transmission
or automatic transmission 01M, removing
- Remove battery with fastened fuse holder
Page 27-52
.
- Remove battery with clipped fuse holder
27-56
.
- Remove bolts -arrows-and remove battery
carrier.
- Disconnect electrical connection -1- and remove
from retainer.
- Disconnect electrical connection at terminal 50
connector -2-.
- Remove nut from solenoid terminal 30 wire
and remove cable.
- Remove wiring from wiring guides.
- Remove wiring guides.
Starter
13/2/2005
27-65
- Remove bolts -arrows- and
remove middle cover of engine
compartment noise insulation.
- Remove nut, unclip securing clips
-arrows- and remove left-hand
engine compartment section of
noise insulation.
- Remove brackets/retainers for
power steering pressure
pipes/hoses and place to side.
Starter
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст