Volkswagen Golf / Golf GTI / Jetta. Manual — part 151
01-146
Read readiness code
Special tools, workshop
equipment, testers, measuring
instruments and auxiliary items
required
Note:
All functions which could previously
be performed with VAG 1551/1552
can also be performed with the
vehicle diagnostic, testing and
information system VAS 5051.
Work sequence
VAG 1551 Scan tool (or VAG
1552 vehicle system tester) with
VAG 1551/3 adapter cable
- Connect VAG 1551 scan tool
((VAG 1552) and select Engine
Control Module (ECM) with the
"Address word" 01. Engine must
be running at idle: (Connecting
scan tool and selecting Engine
Control Module (ECM)
Page
01-12
).
Rapid data transfer
HELP
Select function XX
Indicated on display:
- Press buttons -1- and -5- for
function "Readiness code" and
confirm entry with -Q- button.
Readiness code
01-147
Must appear on display when all
diagnosis functions have been
successfully completed:
Readiness code
00000000 - Test complete
Indicated on display:
- Press
button.
- Press buttons -0- and -6- for
function "End output" and confirm
entry with -Q- button.
- Switch off ignition.
Readiness code
00101101 - Test not complete
Appears on display:
One of the diagnostic checks has not
run through successfully:
- Press
button.
- Generate readiness code
Page
01-149
.
Readiness code
01-148
Significance of figures in 8 digit number block, display zone 1 - Readiness code
The readiness code is generated only when all display zones show 0
1 2 3 4 5 6 7 8
Diagnostic function
0 Three Way Catalytic Converter (TWC)
0 Three Way Catalytic Converter (TWC) heating (currently no
diagnosis/always "0")
0
Evaporative Emissions (EVAP) Canister system (Tank
ventilation system)
0
Secondary air system
0
Air conditioner (currently no diagnosis/always "0")
0
Oxygen Sensor (O2S)s
0
Oxygen Sensor (O2S) heating
0
Exhaust gas recirculation (not installed/always "0")
Readiness code
01-149
Generating readiness code
Special tools, workshop
equipment, testers, measuring
instruments and auxiliary items
required
Note:
All functions which could previously
be performed with VAG 1551/1552
can also be performed with the
vehicle diagnostic, testing and
information system VAS 5051.
Test prerequisites
VAG 1551 scan tool (or VAG
1552) with VAG 1551/3 Adapter
cable
All fuses must be OK.
Readiness code
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст