Volkswagen Golf / Golf GTI / Jetta. Manual — part 564
Note:
n
When pressing drive axle out make sure there is
sufficient clearance.
- Remove drive axle.
Installing
Remove any paint residue and/or corrosion on
thread/splines of outer joint.
- Coat with oil before installing axle shaft;
n
The splines of outer joint,
n
The thread of outer joint
n
Wheel hub splines,
n
The contact surface and thread of 12-point nut
with oil.
- Install drive axle.
- Insert outer joint as far as possible into spline in wheel
hub.
- Pull outer joint into wheel hub until outer joint is in position.
- Install drive axle inner joint and initially tighten bolts
diagonally to 10 Nm.
- Tighten multi-point socket head bolts diagonally to 40 Nm
- Lower vehicle until wheels touch ground.
- Tighten 12-point nut to 200 Nm and loosen 1/2 turn.
- Tightening 12-point nut.
Rear drive axle, servicing
Tightening torque:
50 Nm plus an additional
1
/
6
turn 60
n
To tighten 12-point nut we recommend the angle
measuring wrench V.A.G1756 .
If an angle measuring wrench is not available, then tighten
12-point nut using the following method.
- Lower vehicle until wheels touch ground.
- Tighten 12-point nut to 200 Nm and loosen 1/2 turn.
- Pretighten 12-point nut to 50 Nm.
- Mark one of the 12-points on the nut with a line - arrowA -
.
- Mark 2nd line - arrowB - on edge of wheel hub as shown
in illustration.
- Turn 12-point nut until both points align.
Rear drive axle with constant velocity joint,
servicing
Rear drive axle, servicing
Special tools, testers and auxiliary items
required
n
Thrust plate VW401
n
Thrust plate VW402
n
Punch VW408A
n
Punch VW411
n
Sleeve VW416B
n
Thrust pad VW447H
Rear drive axle, servicing
Special tools, testers and auxiliary items
required
n
Circlip pliers VW161A
n
Torque wrench V.A.G1331
n
Torque wrench V.A.G1332
n
CV joint boot clamp tool V.A.G1682
n
Assembly tool T10065
Grease quantity and type
Filling drive axle with high temperature grease.
See
Parts Catalog
Grease
Amount of:
Outer joint
Total quantity
Joint
Protective boot
Rear drive axle, servicing
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст