Volkswagen Golf / Golf GTI / Jetta. Manual — part 762
- Unclip trim - 1 - at top from A-pillar - 2 - and loosen from
sill panel trim - 3 - at bottom.
Note:
n
Trim - 1 - is secured with two metal clips - 4 - .
Installing
- Installation is reverse of removal.
Note:
n
Before installation, securing clips and retaining clips
must be checked for damage and replaced if
necessary.
Upper B-pillar trim, assembly overview
(Vehicles with side curtain protection
04.01)
Pillar and side trim
13/2/2005
1. Cover cap
2. Bolt
¡
40 Nm
3. Belt relay
4. B-pillar trim
¡
Removing
70-3, Upper B-
pillar trim, removing and
installing (Vehicles with side
curtain protection 04.01)
5. B-pillar
6. Mounting clip
7. Steel clip
Pillar and side trim
13/2/2005
8. Molded headliner
Upper B-pillar trim, removing and installing
(Vehicles with side curtain protection
04.01)
Note:
n
Removal and installation is described for right side of
vehicle. same instructions apply for removal and
installation for left-hand side.
Removing
- Remove lower B-pillar trim
70-3, Lower B-pillar trim,
removing and installing
.
- Remove cap - 1 - .
- Remove screw - 2 - (40 Nm) and remove
belt relay - 3 - .
- Loosen B-pillar trim - 4 - in lower area -
arrowA - .
Pillar and side trim
13/2/2005
- Pull B-pillar trim - 4 - downward - arrow
B - .
- Position standard needle-nose pliers at
side between B-pillar - 1 - and steel clip -
2 - .
- Disengage locking mechanism of steel
clip - 2 - by forcefully pushing toger using
needle-nose pliers - arrows - .
- Remove steel clip - 2 - from B-pillar - 1 -
.
Note:
n
It is not possible to remove steel clip
- 2 - without destroying it, it must be
replaced
Pillar and side trim
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст