Volkswagen Golf / Golf GTI / Jetta. Manual — part 761
- Insert steel clip - 3 - into mount.
- Slide steel clip - 1 - in direction of -
arrowB - up to second detent - 4 - .
Note:
n
upper section of trim panel must be
fixed with steel clip - 4 - , until it
engages audibly.
n
Before installing trim, check clips - 3
- for damage and replace if
necessary.
- Clip trim - 1 - to A-pillar - 2 - .
Pillar and side trim
13/2/2005
- Install door inner seal. .
Upper A-pillar trim, removing and installing
(Vehicles without side curtain protection )
Removing
- Remove inner door seal - 5 - from A-
pillar - 2 - .
Pillar and side trim
13/2/2005
- Unclip trim - 1 - , starting at top, from A-
pillar - 2 - and remove.
Installing
- Installation is reverse of removal.
Note:
n
For safety, steel clips - 3 - and upper C-pillar trim
must be replaced every time trim panel of C-pillar is
removed on a vehicle with side curtain airbags.
n
Steel clips and upper C-pillar trim parts can no longer
be ordered separately for vehicles with side curtain
protection
⇒ parts catalog
Lower A-pillar trim, removing and installing
Pillar and side trim
13/2/2005
Removing
- Remove hood release lever
Repair Manual, Body Exterior, Repair Group 55, Front
hood
- Release cover - 1 - with clips - 2 - from instrument panel -
3 - .
- Remove cover - 1 - - arrow - .
- Remove bolts - 2 - .
- Carefully remove glove compartment - 1 - from instrument
panel - 3 - - arrow - .
Pillar and side trim
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст