Volkswagen Golf / Golf GTI / Jetta. Manual — part 832
01-105
Convenience System Control Module,
coding
Note:
When supplied the control module is precoded
according to the vehicle equipment.
The coding is performed with the V.A.G 1551
scan tool
Page 01-106
or
Page 01-107
.
- Connecting scan tool
Page 01-3
, initiating On
Board Diagnostic (OBD)
Page 01-96
.
Rapid data transfer
HELP
Select function XX
Indicated on display:
- Press buttons -0- and -7- (with 07 the function
"Code control module" is selected).
Rapid data transfer
Q
07 Code control module
Indicated on display:
- Confirm entry with the -Q- button.
Code control module
Q
Enter code number XXXXX (0 -32000)
Indicated on display:
- Enter code number according to table:
Convenience system (vehicles with power windows), On Board Diagnostic (OBD)
13/2/2005
01-106
Coding table, vehicles with convenience
system 05.01
Address word
Code number
Vehicle equipment
2
doors
4
doors
46 Comfort Convenience
Electric windows, one door
00256 04096
46 Comfort Convenience
Electric windows, all doors
00257 04097
46 Comfort Convenience
Electric windows with seat
memory, one door
00258 04098
46 Comfort Convenience
Electric windows with seat
memory, all doors
00259 04099
Convenience system (vehicles with power windows), On Board Diagnostic (OBD)
13/2/2005
01-107
Coding table, vehicles with convenience
system 06.01
Address word
Code number
Vehicle equipment
2
doors
4
doors
46 Comfort Convenience
Electric windows, one door
00064 00258
46 Comfort Convenience
Electric windows, all doors
00065 00259
46 Comfort Convenience
Electric windows with seat
memory, one door
N/A
00258
46 Comfort Convenience
Electric windows with seat
memory, all doors
N/A
00259
Convenience system (vehicles with power windows), On Board Diagnostic (OBD)
13/2/2005
01-108
- Confirm entry with the -Q- button.
1J0959799J 03 Conv. cent. CU 0001
Coding XXXXX
WSC XXXXX
The control module identification
number will be displayed with the
appropriate index letter, the code
number and the workshop code.
If the contents of the display are as
shown then the coding is
successful.
If the code number entered is not
accepted by the control module, the
previous coding will appear in the
display:
1J0959799J 03 Conv. cent. CU 0001
Coding XXXXX
WSC XXXXX
Indicated on display:
In this case the control module has
not been programmed with the
relevant data for the vehicle. A check
must then be completed to see if the
correct control module for the vehicle
has been installed (compare Part
No. and letter index), or whether an
incorrect code number has been
entered.
If the control module cannot be
coded (correct control module,
correct code number), the control
module is malfunctioning.
Furthermore, at this point the door
control module is called-up and
checked.
- Repeat coding.
Convenience system (vehicles with power windows), On Board Diagnostic (OBD)
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст