Volkswagen Golf / Golf GTI / Jetta. Manual — part 831
01-101
Check Control Module Version
- Connecting scan tool
Page 01-3
, initiating On
Board Diagnostic (OBD)
Page 01-96
.
- Switch on ignition.
- Press button -1- for "Rapid data transfer"
mode.
- Switch on printer with Print button (warning lamp
in button lights up).
- Press buttons -0- and -1-.
Rapid data transfer
Q
01-Check Control Module Version
Indicated on display:
- Confirm entry with the -Q- button.
1J0959799J 03 Conv. cent. CU 0001
Coding XXXXX
WSC XXXXX
The control module identification of the Central
control module for comfort system -J393- (Conv.
cent. CU) will be shown on the V.A.G 1551 scan
tool display, e.g.:
Convenience system (vehicles with power windows), On Board Diagnostic (OBD)
13/2/2005
01-102
Breakdown of the display:
Upper
line
Part No. of control module
system designation (03
2)
Comf.
cent. CU 0001)
Lower
line
Code number dealer code
number
1)
1)
Automatically stored in the control module
when checking the system.
2)
A number or number/letter combination (03 or
6Q, or others) indicate a correct programming of
the control module.
- Press
button.
Please wait
Will appear briefly in display:
and then the following appears in the display:
1J0959801A 03 Door CU DS0022
The control module identification of the driver's
door control module will be shown on the V.A.G
1551 scan tool display, e.g.:
- Press
button.
Please wait
Will appear briefly in display:
and then the following appears in the display:
1J0959802B 03 Door CU PS0022
The control module identification of the passenger's
door control module will be shown on the V.A.G
1551 scan tool display, e.g.:
Convenience system (vehicles with power windows), On Board Diagnostic (OBD)
13/2/2005
01-103
- Press
button.
Please wait
Will appear briefly in display:
and then the following appears in the
display:
1J0959811A 03 Door CU RL0022
The control module identification of
the rear left door control module will
be shown on the V.A.G 1551 scan
tool display, e.g.:
- Press
button.
Please wait
Will appear briefly in display:
and then the following appears in the
display:
1J0959812A 03 Door CU RR0022
The control module identification of
the rear right door control module
will be shown on the V.A.G 1551
scan tool display, e.g.:
- Press
button.
Rapid data transfer
HELP
Select function XX
Indicated on display:
Convenience system (vehicles with power windows), On Board Diagnostic (OBD)
13/2/2005
01-104
Note:
Rapid data transfer
HELP
control module does not answer!
If one of the malfunction
messages opposite appears in
the display, the possible causes
of the malfunction can be printed
out with the HELP button.
Rapid data transfer
HELP
K wire not switching to B+!
Ignition must be switched on.
Rapid data transfer
No signal from control module!
Malfunctions have occurred at
the start of or during the program
(external interference?).
Rapid data transfer
Fault in communication build up
Check diagnosis wires as well as
voltage supply and Ground
connection.
- Press buttons -0- and -6- to end
the output.
Rapid data transfer
Q
06 End output
Indicated on display:
- Confirm entry with the -Q- button.
Rapid data transfer
HELP
Enter address word XX
Indicated on display:
- Switch off ignition.
- Disconnect connector to V.A.G
1551 scan tool.
Convenience system (vehicles with power windows), On Board Diagnostic (OBD)
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст