Volkswagen Golf / Golf GTI / Jetta. Manual — part 1198
91-93
Telematic Control Module -
J499-, coding
After replacing the
Telephone/Telematic Control
Module, the control module must be
coded and OnStar
system needs to
be reconfigured.
Special tools, testers and auxiliary
items needed
Notes:
VAS 5051 Vehicle Diagnostic
Testing and Information System
Cable adapter VAS 5051/5a or
VAS 5051/6a
DO NOT exchange
Telephone/Telematic Control
Modules between vehicles! Each
module contains specific Station
Identification (STID) and
Electronic Serial Number (ESN)
data unique to the VIN. This data
is used by OnStar
and
National Cellular Telephone
Network to identify the vehicle
and administer the customer's
account.
Using the VAS 5051 Vehicle
Diagnostic Testing and
Information system in operating
mode "Guided Fault Finding, and
function "-J499- Telematic
control module, replacing" it is
possible to read the telematic
control module coding from the
existing module before removal.
Note code prior to removal in
order input code into
replacement control module.
- Connect VAS 5051 with adapter
cable to Data Link Connector
(DLC) and select mode "Guided
Fault Finding"
Telematics
13/2/2005
- Enter appropriate model,
equipment and model year
information and press ">" to
confirm.
Telematics
13/2/2005
91-94
After all Control Modules have been registered
and DTC memories checked:
- Select "Go to"
- Select "Function / Component Selection"
- Select "Body (Repair Group 01; 27; 50 to 97"
- Select "Electrical System (Repair Group 27; 90
to 97)
- Select "01-Systems capable of self-diagnosis"
- Select "Telematics NAR"
- Select "Functions - Telematics NAR" and press
">" to confirm.
- Select "Telematics control module, coding"
- Follow testers prompts.
Telematics
13/2/2005
91-95
Telematic Control Module -
J499-, reconfiguring
After replacing the
Telephone/Telematic Control
Module, the control module must be
coded and OnStar
system needs to
be reconfigured as described below.
Have the VIN and customer details
on hand.
Special tools, testers and auxiliary
items needed
Notes:
Prerequisite
VAS 5051 Vehicle Diagnostic
Testing and Information System
Cable adapter VAS 5051/5a or
VAS 5051/6a
DO NOT exchange
Telephone/Telematic Control
Modules between vehicles! Each
module contains specific Station
Identification (STID) and
Electronic Serial Number (ESN)
data unique to the VIN. This data
is used by OnStar
and
National Cellular Telephone
Network to identify the vehicle
and administer the customer's
account.
Failure to reconfigure the control
module after replacement will
prevent OnStar
services and
features from functioning, and
will result in a customer return for
repair.
Telematics control module is
coded
Page 91-93
.
Telematics
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст