Volkswagen Golf / Golf GTI / Jetta. Manual — part 409
Repair
Manual,
Suspension,
Wheels,
Steering,
Repair Group
42
disassembly
Only
replace
complete
Removing
and
installing
ABS system components for front axle, removing and installing
45-27
Repair
Manual,
Suspension,
Wheels,
Steering,
Repair Group
42
6 - Self-
locking
12-
point
nut,
175 Nm
(129 ft.
lb)
Replace
each
time
after
removing
7 - Cap
Pressing
off and
driving
in
8 - Brake
disc
9 - Screw
10 - Hex
bolt, 60
Nm (44
ft. lb)
With
dished
spring
11 - Axle
beam
ABS system components for front axle, removing and installing
45-28
Wheel speed sensor on rear axle,
removing and installing
Removing
- Raise vehicle.
Installing
- Disconnect wheel speed sensor
and speed sensor wiring
connector -1-.
- Remove bolt -2- from stub axle.
- Pull ABS wheel speed sensor out
of stub axle.
- Before inserting wheel speed
sensor, clean mounting hole inner
surface and coat speed sensor
with lubricant G 000 650.
- Insert wheel speed sensor into
hole in stub axle and tighten bolt
to 8 Nm (70 in. lb).
- Connect wheel speed sensor to
speed sensor wiring.
ABS system components for front axle, removing and installing
45-29
Wheel speed sensor on rear axle
(drum brakes), removing and
installing
Removing
- Raise vehicle.
Installing
- Disconnect wheel speed sensor
and speed sensor wiring
connector -1-.
- Remove bolt -2- from stub axle.
- Pull ABS wheel speed sensor out
of stub axle.
- Before inserting speed sensor,
clean mounting hole inner surface
and coat speed sensor with
lubricant G 000 650.
- Insert speed sensor into hole in
stub axle and tighten bolt to 8 Nm
(70 in. lb).
- Connect speed sensor to speed
sensor wiring.
ABS system components for front axle, removing and installing
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст