Volkswagen Golf / Golf GTI / Jetta. Manual — part 877
01-284
Evaluating display group number 016
Display
zone
Description
Display
Corrective action
1
Alarm source
(last)
See table
below
Only the last 4 ATA
1)
activations are
shown!
2
Alarm source
(2nd last)
For example "2" = Front passenger rotary
latch switch (see table below for possible
sources of alarm)
3
Alarm source
(3rd last)
4
Alarm source
(4th last)
1)
Anti-theft alarm
Possible sources of alarm
Display
Driver's rotary latch switch
1
Front passenger rotary latch
switch.
2
Rear left rotary latch switch
4
Rear right rotary latch switch
8
Rear lid/tailgate contact switch
16
Immobilizer
17
Engine hood contact switch
32
Ignition
64
No alarm
255
Convenience system (vehicles with power windows), On Board Diagnostic (O...
13/2/2005
01-285
Adaptation
Ignition keys, matching to radio wave remote
control
Note:
If new or additional ignition keys are required
they must be matched to the immobilizer and
convenience system control electronics.
The matching procedure must always be
carried out for all the ignition keys, including the
existing ones.
The number of keys already matched will be
displayed when the adaptation (matching)
function is selected.
With the introduction of this generation of
convenience system it is possible to program
additional functions. The functions and the
programming are described
Page 01-292
.
The matching can be interrupted with the "C"
button of the V.A.G 1551.
WARNING!
The V.A.G 1551 dealership number (workshop
code) will be stored in immobilizer control
module when matching ignition keys.
Convenience system (vehicles with power windows), On Board Diagnostic (O...
13/2/2005
01-286
Prerequisites
All ignition keys available. If no old ignition key
is available see "Lost key procedure",
Repair Manual, Electrical Equipment On
Board Diagnostic (OBD),Repair Group 01;
Matching ignition keys
Key fob with covered secret number is
available, if not see "Establishing secret
number",
Repair Manual, Electrical Equipment On
Board Diagnostic (OBD),Repair Group 01;
Matching ignition keys
- Insert correct profile ignition key in the ignition
lock.
- Connecting scan tool
Page 01-3
, initiating On
Board Diagnostic (OBD)
Page 01-96
.
The adaptation shown here is only an example.
Rapid data transfer
HELP
Select function XX
Indicated on display:
- Press buttons -1- and -0- (10 selects function
"Adaptation").
Rapid data transfer
Q
10 - Adaptation
Indicated on display:
- Confirm entry with the -Q- button.
Adaptation
Enter channel number XX
Indicated on display:
- Press buttons -0- and -0- (all buttons are erased
with channel number 00).
Convenience system (vehicles with power windows), On Board Diagnostic (O...
13/2/2005
01-287
- Confirm entry with the Q button.
Note:
It is not possible to match a new or
additional key(s) without erasing
existing learned/matched key(s).
Adaptation
Q
Erase learned values
Indicated on display:
- Confirm entry with the -Q- button.
Adaptation
Learned values are erased
Indicated on display:
- Press
button.
Rapid data transfer
HELP
Select function XX
Indicated on display:
- Press buttons -1- and -0- (10
selects function "Adaptation").
Rapid data transfer
Q
10 - Adaptation
Indicated on display:
- Confirm entry with the -Q- button.
Adaptation
Enter channel number XX
Indicated on display:
- Press buttons -0- and -1- (all keys
are "learned" with channel
number 01).
Adaptation
Q
Enter channel number 01
Indicated on display:
- Confirm entry with the -Q- button.
Convenience system (vehicles with power windows), On Board Diagnostic (O...
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст