Volkswagen Golf / Golf GTI / Jetta. Manual — part 1102
27-139
Cruise control system - 1.9L TDI,
activating
If a Diesel Direct Injection Engine Control Module
(ECM) has been replaced, it may be necessary
to activate the cruise control function in the new
ECM. Check system status and
activate/deactivate system using the following
procedure:
- Connect VAG 1551 / 1552 Scan Tool
Page
27-133
.
- Switch on ignition.
- Press buttons -0- and -1- to select Address word
01: "Engine electronics".
038906018M 1,9l R4 EDC G00SG 0602
Coding 00001
WSC XXXXX
Display (example only)
If top line of display shows "G00SG", cruise
control is activated.
If top line of display shows "00SG", cruise
control is not activated.
Cruise Control System (CCS) through m.y. 2001
13/2/2005
27-140
- To begin activation sequence
press
button.
Rapid data transfer
HELP
Select function XX
Display will appear as shown
- Press buttons -1- and -1- to select
function 11 "Login procedure"
Rapid data transfer
Q
11 - Login procedure
Display will appear as shown
- Press -Q- button to enter input.
Login procedure
Input Code Number XXXXX
Display will appear as shown
- To activate cruise control, enter
code number 11463
- To deactivate cruise control, enter
code number 16167
- Press -Q- button to enter input.
- End output (function 06) and
perform test drive to confirm
cruise control functions.
Cruise Control System (CCS) through m.y. 2001
13/2/2005
27-141
Cruise control system - 1.8L Turbo, 2.0L
(codes AVH & AZG) and 2.8L VR6,
activating
If a Motronic Engine Control Module (ECM) has
been replaced, it may be necessary to activate
the cruise control function in the new ECM.
Activate/deactivate system using the following
procedure:
- Connect VAG 1551 / 1552 Scan Tool
Page
27-133
.
- Switch on ignition
- Press buttons -0- and -1- to select Address word
01: "Engine electronics".
021906018B Motronic ME7.1 G V06
Coding 00000
WSC XXXXX
Display (example only)
- Press
button.
Rapid data transfer
HELP
Select function XX
Display will appear as shown
- Press buttons -1- and -1- to select function 11
"Login procedure"
Rapid data transfer
Q
11 - Login procedure
Display will appear as shown
- Press -Q- button to enter input.
Cruise Control System (CCS) through m.y. 2001
13/2/2005
27-142
Login procedure
Input Code Number XXXXX
Display will appear as shown
- To activate or deactivate cruise
control system, use scan tool key
pad to enter appropriate value
from table below:
Engine
(code) -
m.y.
Activate Deactivate
1.8L &
2.8L -
through
m.y. 1999
00003
00004
2.0L, 1.8L
& 2.8L -
from m.y.
2000
through
m.y.2001
11463
16167
- Press -Q- button to enter input.
- End output (function 06) and
perform test drive to confirm
cruise control functions.
Cruise Control System (CCS) through m.y. 2001
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст