Volkswagen Golf / Golf GTI / Jetta. Manual — part 1103
27-143
Cruise Control System
(CCS) from m.y. 2002
General information
All cruise control system functions are
controlled by the applicable Engine Control
Module (ECM). The processing of electronic
engine controls and cruise control functions
are integrated in the ECM. Other than the
cruise control switches on the steering
column/multifunction steering wheel, the
clutch and brake pedal switches and related
wiring, there are no separate cruise control
components to be serviced.
As all electronic throttle control operations
are monitored by On Board Diagnostic
(OBD), Diagnostic Trouble Codes (DTC)
pertaining to engine electronics that are
stored in DTC memory may be relevant to
cruise control function.
Always check DTC memory first before
troubleshooting.
All CCS troubleshooting and OBD
program functions on vehicles from m.y.
2002 should be performed using the VAS
5051 / 5052 Vehicle Diagnostic Testing
and Information System in operating
mode "Guided Fault Finding" or "Vehicle
Self-Diagnosis"
Cruise Control System (CCS) from m.y. 2002
13/2/2005
90-1
Instrument cluster
General information
The instrument cluster contains an electronic
speedometer, tachometer, liquid crystal (LCD)
displays for odometer, trip odometer/clock, as
well as analog coolant temperature and fuel level
gauges. Control and warning lamps are situated
within and between the speedometer and
tachometer. Automatic transmission models also
contain an LCD gear indicator display.
An LCD multi-function trip computer (MFI) with
two operating modes is available on some
models. When equipped, the MFI display is
located between in the tachometer and
speedometer. MFI functions include selectable
displays for trip time/mileage, average trip speed,
average trip fuel consumption and outside
temperature.
The instrument cluster also supplements various
warning lamp displays with control module-
controlled acoustic warnings.
Notes on replacing instrument cluster
Do not disassemble instrument cluster.
All control and warning lights are Light Emitting
Diodes (LEDs) which cannot be serviced
separately. LED malfunctions require
replacement of instrument cluster.
Instrument clusters contain no field serviceable
components. Malfunctions require replacement
of instrument cluster.
Instrument cluster
13/2/2005
90-2
When the replacement of a malfunctioning
instrument cluster is necessary, follow
exchange part procedures.
Complete report form and return together with
inst. cluster.
Use the original packaging from the new cluster
when returning modules.
The odometer reading must be matched to the
new/exchange instrument cluster.
Through m.y. 1999:
Repair Manual, Electrical Equipment On
Board Diagnostic (OBD), Repair Group 01.
From m.y. 2000:
VAS 5051/5052 Vehicle Diagnostic Testing
and Information System in mode "Guided Fault
Finding"
Additional information:
Complaint/symptom based repairs ("Service
Fixes")
Technical Bulletins
Instrument cluster, On Board Diagnostic
(OBD)
Repair Manual, Electrical Equipment On
Board Diagnostic (OBD), Repair Group 01.
VAS 5051/5052 Vehicle Diagnostic Testing
and Information System in mode "Guided Fault
Finding"
Instrument cluster
13/2/2005
90-3
On Board Diagnostic (OBD),
function
The instrument cluster is controlled by an
internal microprocessor with On Board
Diagnostic (OBD) capability. If malfunctions
occur in monitored sensors and
components, Diagnostic Trouble Codes
(DTC) will be stored in memory.
If OBD recognizes instrument cluster
malfunctions related to the:
odometer
distance impulse number (K number)
speedometer calibration
the trip odometer display will change to
show "dEF.".
In this case, replace speedometer
Page
90-8
.
Other malfunctions recognized by OBD will
not cause the trip odometer display to
change as described above.
However, before performing any
troubleshooting or inspection, always begin
by checking for DTCs using the On Board
Diagnostic (OBD) program. DTCs stored in
memory are retrieved/checked with VAG
1551 / 1552 Scan Tools (ST) or VAS 5051 /
5052 Diagnostic Testing and Information
System
Repair Manual, Electrical Equipment On
Board Diagnostic (OBD), Repair Group 01.
or
VAS 5051/5052 Vehicle Diagnostic
Testing and Information System in mode
"Guided Fault Finding"
Instrument cluster
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст