Volkswagen Golf / Golf GTI / Jetta. Manual — part 278
34-26
Functional check
Gear shift lever must rest in 3rd/4th gear gate
with transmission in neutral.
- Operate clutch.
- Select all gears several times. Pay particular
attention to operation of reverse gear lock.
Should a gear fail to engage smoothly after
repeated selection of 1st, 2nd, 5th or 6th gear,
check the following:
- Carefully guide gear shift lever in neutral to left
into gate for 1st/2nd gear.
If this cannot be accomplished:
Selector shaft must move downward (arrow
- To check if shift mechanism is correctly
adjusted, have second technician attempt to
push locking pin -A- into transmission (direction
of arrow) and thus into selector shaft gate.
- Adjust selector mechanism,
Page 34-22
Gear selector mechanism, servicing
34-27
Transmission,
removing and
installing
Special tools and
equipment
10-222 A Support
10-222 A/1
Support
10-222 A/2 Special
hook
10-222 A/3
Adapter
3094 Hose clamps
3282 Transmission
support
Transmission, removing and installing
34-28
Special tools and
equipment
3282/27 Adjustment
plate
3282/48 Pins (Qty.
2)
3282/52 Support
3300 A Engine
support
3336 Transmission
lifting beam
VAG 1331 Torque
wrench
VAG 1332 Torque
wrench
VAG 1383 A
Engine/transmission
jack
Transmission, removing and installing
34-29
Special tools and equipment
VAS 5024 Assembly pliers
T10036 Support rail
Transmission, removing and installing
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст