Volkswagen Golf / Golf GTI / Jetta. Manual — part 1203

91-111

The transmitting system must only be used

when shielded to prevent interference in the
antenna wiring. To ensure the system it is
tuned and operating correctly it is
recommended that an output/performance
check is carried out.

Further additional installations

The installation of further electronic

equipment like business equipment (e.g. TV,
FAX) or household equipment (e.g. electrical
cool box) is only permitted, if these
appliances are marked with a CE or e-sign
(Europe only).

Voltage supply is performed via a separate

wiring harness and secured by a fuse.

Mobile telephone and two-way radio operation, notes

13/2/2005

91-112

Battery,
transmitter/receiver
unit - fuse and
wiring harness,
overview

Wiring Diagrams and
Component Locations

1 - Positive

connection

Red wire with

suitable
connection.

2 - To terminal 15a

Connection to

terminal 15a:

Ensure wire is

protected by
fuse.

Fuse

protection
max. 15A

3 - Antenna

Ground (GND)

Ensure correct

Ground (GND)
connection to
body.

The antenna

location must
be treated with
suitable
corrosion
protection.

Mobile telephone and two-way radio operation, notes

13/2/2005

91-113

4

-

Transmitter/receiver
antenna

Fitting

locations:
table

Page

91-115

.

5 - Shielded

antenna wire

Wire with

coaxial
connector

6

-

Telephone or two
way radio
transmitter/receiver
unit

7 - Wiring harness

Voltage supply

positive via red
wire 2.5 mm
cross section.

Voltage supply

negative via
brown wire 2.5
mm cross
section.

If necessary,

wire to terminal
15a via black
wire 1.5 mm
cross section.

8 - Fuse holder

Install next to

battery.

Mobile telephone and two-way radio operation, notes

13/2/2005

91-114

9 - To

Starter

10 - Battery

Located in

the engine
compartment
at the front
left corner.

11 - Negative

( - ) wire

12 - Body

Ground
(GND)

Mobile telephone and two-way radio operation, notes

13/2/2005