Volkswagen Golf / Golf GTI / Jetta. Manual — part 868
01-249
Rapid data transfer
Q
03 Output Diagnostic Test Mode (DTM)
Indicated on display:
- Confirm entry with the -Q- button.
Final Control Diagnosis
Indicated on display:
Perform Output Diagnostic Test
Mode (DTM) by pressing button for
each individual tests: See table on
Page 01-247
.
Output Diagnostic Test Mode (DTM)
can be terminated by pressing the -
C- button.
If a component does not function:
- Press
button.
- Continue Output Diagnostic Test
Mode (DTM) to the end.
Convenience system (vehicles with power windows), On Board Diagnostic (O...
13/2/2005
01-250
Read measuring value block, vehicles
from 06.01 on
Special tools, testers and auxiliary items
V.A.G 1551 Scan tool with V.A.G 1551/3
cable
- Connecting scan tool
Page 01-3
, initiating On
Board Diagnostic (OBD)
Page 01-96
.
The measured values in the functions Read
Measuring Value Block and basic setting are
described during the individual component test.
This table serves only as an overview.
The measured value block is divided into 16
display group numbers. The assignment of the
individual display zones can be taken from the
display group overview
Page 01-252
.
Rapid data transfer
HELP
Select function XX
Indicated on display:
- Press buttons -0- and -8- (08 initiates the "Read
Measuring Value Block" function).
Rapid data transfer
Q
08 Read Measuring Value Block
Indicated on display:
- Confirm entry with the -Q- button.
Read Measuring Value Block
HELP
Input display group number XX
Indicated on display:
Note:
The display group number 001 is an example, to
illustrate the sequence.
Convenience system (vehicles with power windows), On Board Diagnostic (O...
13/2/2005
01-251
- Press buttons -0-, -0- and -1- for "Display group
number 1" and confirm entry with -Q- button.
Read Measuring Value Block 1
1
2
3
4
Indicated on display: (1 to 4
Display zones)
Note:
To change to another display group proceed as
follows:
Display
group
V.A.G 1551
V.A.G 1552
Higher
Press button -
3-
Press
button
Lower
Press button -
1-
Press
button
Skip
Press button -
C-
Press button -
C-
- Displayed after pressing -C- button.
Read Measuring Value Block
HELP
Input display group number XXX
Indicated on display:
- Now enter the display group number required.
Convenience system (vehicles with power windows), On Board Diagnostic (O...
13/2/2005
01-252
Display group overview, vehicles from 06.01 on
Break down of display content for display group number 001
Display group 001 -Driver's door-
Read measured
value block 1
Indicated
on display
xxx xxx
xxx
1
2
3
4
Display
zone
Specification
Evaluation
Empty
1)
Child safety switch
yes, no,
not installed
Page 01-
253
Driver's side electric
window thermal
protection
2)
yes, no
Electric window - Hall signal,
driver's side
autom. open, autom. close,
man. open, man. close not
operated, implausible
1)
Empty means in this case: Display zone is blank
2)
Software thermo protection (overload protection for electric window motor). The
electric window will be switched off for approx. 10...20 seconds
Convenience system (vehicles with power windows), On Board Diagnostic (O...
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст