Volkswagen Golf / Golf GTI / Jetta. Manual — part 655
- Pull hood lock - 1 - slightly toward front. Using a
screwdriver - 3 - , unclip Bowden cable - 2 - from lock in
direction of - arrow - .
- Disconnect connector from micro-switch.
Installation is performed in reverse order of removal.
Hood
13/2/2005
55 - 2
Rear lid (Golf)
Tools
Special tools, testers and auxiliary items required
Socket wrench T10010
Adjusting gauge 3371
Rear lid (Golf), assembly overview
Rear lid (Golf)
13/2/2005
1. Rear lid
¡
Adjusting
55-2, Rear lid,
adjusting
¡
Gap dimension Body panel gaps;
Body, rear
2. Trim
¡
Removing and installing
3. Rubber stop
¡
Adjusting
55-2, Rear lid,
Repair Manual, Body Interior, Repair
Group 70, Rear lid trim; removing and
installing lower trim of rear lid
Rear lid (Golf)
13/2/2005
adjusting
4. Gas-filled strut
¡
Removing and installing
55-2,
Gas-filled strut, removing
¡
Venting gas
55-2, Releasing gas
from gas-filled strut
5. Bolt
¡
22 Nm
6. Lock plate
¡
Adjusting - within elongated holes
¡
Gap dimension Body panel gaps;
Body, rear
7. Cap
8. Blind nut
9. Hex nut
¡
24 Nm
10. Hinge
11. Bolt
¡
10 Nm
Gas-filled strut, removing
- Support rear lid.
Rear lid (Golf)
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст