Volkswagen Golf / Golf GTI / Jetta. Manual — part 752
n
Golf wagon/Jetta wagon
70-3, Wheel housing trim,
removing and installing (Golf wagon/Jetta wagon)
.
Caution!
Observe safety precautions for working on airbags
69-4, Safety precautions when working on airbags
.
Caution!
Electrostatic charges may result in
involuntary deployment of airbag.
Therefore, mechanic must be
electrostatically discharged before
disconnecting ignition- and Ground
(GND) wires. This is done e.g. by
briefly grasping chassis or door
striker.
- Disconnect harness connector - 2 - .
- Remove bolts - 3 - and - 4 - .
Crash sensors
13/2/2005
Installing
- Install crash sensor - 1 - with bolts - 3 -
(6 Nm) and - 4 - (6 Nm).
- Connect connector - 2 - into connector
housing for crash sensor - 1 - .
- Switch on ignition.
- Close doors.
Caution!
Make sure no one is in vehicle.
- Connect battery Ground (GND) strap
Repair Manual, Electrical Equipment,
Repair Group 27, disconnecting and
connecting battery
Crash sensors
13/2/2005
.
Crash sensors
13/2/2005
70 - 1
Instrument panel
Instrument panel, removing and installing
Special tools, testers and auxiliary items required
n
Radio release tool 3316
n
Assembly tool T10034
Caution!
Disconnect battery ground (GND) strap before working
on electrical system.
Note:
n
Observe notes regarding coding in radio operators
manual before disconnecting battery.
n
removal and installation procedures may have to be
modified slightly depending on equipment variants
n
After connecting battery, vehicle options (radio, clock,
electric window regulator) must be checked according
to repair manual and/or user manual.
Instrument panel
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст