Volkswagen Golf / Golf GTI / Jetta. Manual — part 719
66 - 2
Outside rear view mirror
Tools
Special tools, testers and auxiliary items required
Pry lever 80-200
Outside rear view mirror, assembly
overview
Outside rear view mirror
13/2/2005
1. Mirror housing
¡
Removing
66-2, Mirror housing,
removing
.
¡
Material - ABS
2. Bolt
¡
10 Nm
3. Cover for outside rearview mirror
4. Bolt
5. Clip
6. Connector
7. Insulation
Outside rear view mirror
13/2/2005
8. Mirror lens
¡
Removing
¡
Installing:
¡
Only press on center of glass -
always use protective gloves
- Press off mirror lens first
at bottom, then at top
special tool Pry lever 80-
200 protect mirror housing
from damage.
- Insert mirror lens into
mount with guide pins and
press on.
Mirror housing, removing
- Fold rearview mirror toward front for easier installation.
- Set mirror lens - 2 - vertically (otherwise mirror housing
may remain hanging on mirror lens when tightening).
- Insert screwdriver - 5 - through assembly hole of mirror
carrier up to clamp - 4 - .
- Press screwdriver - 5 - in direction of - arrow - (clamp - 4
- releases mirror housing by doing this).
Outside rear view mirror
13/2/2005
- Remove mirror housing - 1 - upward from mirror carrier - 3
- .
Outside rear view mirror (manual), removing
- Removing front door trim
Outside rear view mirror
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст