Volkswagen Golf / Golf GTI / Jetta. Manual — part 718
- Place foam shims contained in repair set between window
regulator motor and carrier assembly.
- Install motor for window regulator.
- Tighten bolts to 3.5 Nm.
Vehicles with mechanical window regulators
- Connect transfer element for cable reel - 1 - .
- Insert new seals - 2 - .
- Connect crank mechanism - 2 - . If necessary, align
transfer element for cable reel and crank mechanism. To
do so, rotate transfer element as far until transfer element
and crank mechanism have correct position to each other.
- Tighten bolts to - 1 - to 3.5 Nm.
Continued for all vehicles
- Installing carrier assembly with window regulator
64-2,
Carrier assembly, removing and installing
.
- Slide door window into clamping brackets without
excessive force and align to rear window guide.
- Tighten bolts for clamping brackets to 10 Nm.
Door windows
13/2/2005
66 - 1
Wheelhousing liner, removing and
installing
Front wheelhousing liner
1. Wheelhousing liner
¡
Material - PP/EPDM
¡
Removing
- Remove wheel.
Tightening torque of wheel
bolts = 120 Nm.
- Remove bolts
Item - 3 -
(Qty. 12) and remove
wheelhousing liner.
Wheelhousing liner, removing and installing
13/2/2005
2. Expanding nut
3. Screw
4. Speed nut
¡
Connected to bumper cover
Rear wheelhousing liner
1. Wheelhousing liner
¡
Material - PP/EPDM
¡
Removing
- Remove wheel.
Tightening torque of wheel
bolts = 120 Nm.
Wheelhousing liner, removing and installing
13/2/2005
2. Speed nut
¡
Connected to bumper cover
3. Screw
4. Expanding nut
- Remove bolts
Item - 3 -
(Qty. 7) and remove
wheelhousing liner.
Wheelhousing liner, removing and installing
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст