Volkswagen Golf / Golf GTI / Jetta. Manual — part 373
01-168
List of selectable functions
Page
00
-
Automatic test sequence
Page
01-169
01
-
Check control module version
Connecting V.A.G 1551 scan
tool and selecting function
Page
01-163
01
-
Check control module version
Connecting tester VAS 5051 and
selecting function
Page
01-31
02
-
Check Diagnostic Trouble Code
(DTC) memory
Page
01-170
03
-
Output Diagnostic Test Mode
(DTM)
Page
01-74
04
-
Initiate basic setting
Page
01-264
05
-
Erase DTC memory
Page
01-230
06
-
End output
Page
01-230
07
-
Code control module
Page
01-232
08
-
Read measured value block
Page
01-240
11
-
Login procedure
Page
01-287
On Board Diagnostic (OBD), performing
01-169
Automatic test sequence
The automatic test sequence checks all the
Diagnostic Trouble Codes (DTC) memories of
the control modules.
- Switch on ignition.
V.A.G - On Board Diagnosic
HELP
1 - Rapid data transfer1)
2 - Blink code output1)
Indicated on display:
1)
Is displayed alternately
- Press key -1- for "Rapid data transfer" operating
mode.
- Switch on printer with the Print key (indicator
lamp in key lights up).
Rapid data transfer
HELP
Select function XX
Indicated on display:
- Press key -0- twice; 00 to enter "Check
automatic test sequence" function.
- Confirm entry with Q key.
032906026BI 1.6l R4 MONO 1.3 D1 TEV
Coding 00002 WSC XXXXX
The V.A.G 1551 scan tool will show the engine
control module identification is displayed first e.g.
Thereafter all control module identifications with
eventual DTC memory entries are displayed.
On Board Diagnostic (OBD), performing
01-170
Diagnostic Trouble Code
(DTC) memory, checking
Note:
All functions which could previously
be performed with V.A.G 1551 can
now also be carried out with the
tester VAS 5051.
Rapid data transfer
HELP
Select function XX
Indicated on display:
- Press keys -0- and -2-; 02 enters
the "Check DTC memory"
function.
Rapid data transfer
Q
02 - Check DTC memory
Indicated on display:
- Confirm entry with Q key.
X DTCs recognized!
The number of stored DTCs or "No
DTC recognized" appears in the
display.
- Press
key.
The stored DTCs are displayed
and printed out one after the
other.
- With DTC information print-out,
eliminate malfunction according to
DTC table,
Page 01-189
.
As with "No DTC recognized", the
program returns to the start
position after pressing the
key:
On Board Diagnostic (OBD), performing
01-171
Rapid data transfer
HELP
Select function XX
Indicated on display:
Work sequence if a DTC has been
recognized:
1. Repair malfunction according to
DTC table,
Page 01-189
2. Check DTC memory (Function
02)
3. Erase DTC memory (Function 05)
4. End output (Function 06)
5. Perform a test drive
6. Check DTC memory again
- End output (Function 06)
Page
01-230
.
- Switch off ignition and unplug
diagnostic connector.
On Board Diagnostic (OBD), performing
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст