Volkswagen Golf / Golf GTI / Jetta. Manual — part 372
01-164
Note:
The ABS function is switched off in the control
module during the OBD. This is indicated by the
flashing of ABS warning light -K47- and warning
light for brake system -K118-. If there is a
malfunction currently, it will be indicated by the
lights being on constantly.
The DTC memory can be erased after
successful check and repair.
- With ignition switched off, connect V.A.G 1551
to diagnostic connection using cable V.A.G
1551/3 A.
- Connect VAS 5051
Page 01-31
.
V.A.G - On Board Diagnostic
HELP
1 - Rapid data transfer1)
2 - Blink code output1)
Indicated on display:
1)
Is displayed alternately
If the display remains blank, check Data Link
Connector connection, Electrical check,
Page
01-288
, test steps 21 and 22.
Note:
Depending on the program, additional operating
information can be printed out by pressing the
HELP key of V.A.G 1551.
The
key is used for moving forward within
the program
The PRINT key is used for switching on the
printer (warning lamp in key comes on).
On Board Diagnostic (OBD), performing
01-165
- Switch on ignition.
- Switch on printer with the Print key (indicator
lamp in key lights up).
- Press key -1- for "Rapid data transfer" operating
mode.
Rapid data transfer
HELP
Enter address word XX
Indicated on display:
- Press keys -0- and -3-; 03 to input address word
of vehicle system to be tested:"Brake
electronics".
Rapid data transfer
Q
03 - Brake electronics
Indicated on display:
- Confirm input with Q key.
1C0 907 379 E ESP FRONT MK60 0103
Coding 0011266
WSC XXXXX
And then the display shows e.g.:
Displayed is:
e.g. (1C0 907 379 E).
Allocation of control module see Parts catalog
The control module identification number.
On Board Diagnostic (OBD), performing
01-166
System designation (ESP).
Type of drive (front wheel).
ABS (Mark 60).
Control module coding
(0011266).
Coding control module
Page 01-
232
.
Workshop code
V.A.G 1551 scan tool operating
instructions
If the control module identification
number does not appear; Summary
of functions
Page 01-168
.
- Press
key.
Rapid data transfer
HELP
Select function XX
Indicated on display (select function,
e.g. 02 - Interrogate fault memory).
Rapid data transfer
HELP
Control module does not answer!
Indicated on display:
- By pressing the HELP key, a list
of possible fault causes is printed
out.
- After eliminating the possible
causes of malfunctions, enter the
address word 03 for "Brake
electronics" again and confirm.
On Board Diagnostic (OBD), performing
01-167
If "control module does not answer!"
again appears:
Rapid data transfer
HELP
control module does not answer!
Indicated on display:
- Perform test steps 1, 2 and 3
Page 01-288
, Electrical check.
Rapid data transfer
No signal from control module!
Control module identification
influenced during checking (possibly
influenced from external sources?)
- Check diagnostic wire as well as
voltage supply and Ground
connection for ABS Control
Module (w/EDL) -J104-, Electrical
check,
Page 01-288
.
- After repairing the possible
causes of the malfunction, again
enter the address word 03 for
"Brake electronics" and confirm
with Q key.
On Board Diagnostic (OBD), performing
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст