Volkswagen Golf / Golf GTI / Jetta. Manual — part 768
- Bolt spacer sleeve - 6 - , tension disc - 7
- and belt relay - 8 - with hex bolt - 9 - (40
Nm) to C-pillar.
Upper C-pillar trim, assembly overview (Golf
without side curtain protection)
Pillar and side trim
13/2/2005
1. Upper C-pillar trim
¡
Removing
70-3, Upper C-
pillar trim, removing and
installing (Golf without side
curtain protection)
2. Securing clips
¡
Qty. 5
3. Speed nuts
4. Wheelhousing
5. Studs
¡
Qty. 2
6. Belt relay
Pillar and side trim
13/2/2005
7. Lower trim
8. Plugs
Upper C-pillar trim, removing and installing
(Golf without side curtain protection)
Note:
n
Removal and installation is described for right side of
vehicle. same instructions apply for removal and
installation for left-hand side.
Removing
- Remove support, luggage compartment cover
70-4,
Luggage compartment cover support, removing and
installing (Golf)
.
- Remove roof end strip
70-6, Roof end strip, removing
and installing (Golf)
.
- Unclip plugs - 8 - from C-pillar.
- Remove trim - 1 - from C-pillar at top.
- Remove speed nuts - 3 - from both studs
- 5 - .
Note:
n
two speed nuts - 3 - are hidden
between body flange of wheel
housing - 4 - and C-pillar trim - 1 - .
Pillar and side trim
13/2/2005
- Unclip trim - 1 - from C-pillar.
Installing
- Installation is reverse of removal.
Upper C-pillar trim, removing and installing
(Jetta with side curtain protection )
Note:
n
Removal and installation is described for right side of
vehicle. same instructions apply for removal and
installation for left-hand side.
Removing
- Remove rear shelf
70-3, Rear shelf, removing and
installing
.
Pillar and side trim
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст