Volkswagen Golf / Golf GTI / Jetta. Manual — part 1165
01-52
Read Measuring Value Block (function
08)
Use this function to observe various radio system
inputs.
The measuring value block is divided into 5
display groups, each containing up to 4 display
fields.
- Connect VAG 1551 Scan Tool (ST), input
address word 56 "Radio" and then press
button, until "Select function XX" is shown in
display.
Rapid data transfer
HELP
Select function XX
Indicated on display:
- Press buttons -0- and -8- to select "Read
measuring value block" function 08.
Rapid data transfer
Q
08 - Read measuring value block
Indicated on display:
- Press -Q- button to confirm input.
Read measuring value block
Q
Enter display group number XX
Indicated on display:
- Using the Scan Tool (ST) button pad, enter
required display group number (following
example shows display group 001).Press keys
0, 0 and 1 for "Display group number 1" and
press -Q- button to confirm input.
Radio system - Premium VI (including Monsoon) from 12.01, On Board Diagnos...
13/2/2005
01-53
Read Measuring Value Block 1
1
2
3
4
Indicated on display: (1...4
Display zones)
Notes:
Interpreting display groups and
evaluating measured values in
individual display fields
tables
beginning
Page 01-54
.
With printer switched on,
information on display is printed
out.
To easily change between
display groups, proceed as
follows:
Display
group
VAG
1551
VAG 1552
Higher
Press
button 3
Press
button
Lower
Press
button 1
Press
button
Skip
Press
button C
Press
button C
- Displayed after pressing -C-
button.
Read Measuring Value Block Help
Enter display group number XXX
Indicated on display:
Notes:
- Enter display group number as
needed
tables beginning
Page 01-54
.
Display fields always show actual
values transmitted from senders
and sensors.
Other display groups are
possible, but are not required for
On Board Diagnostic program!
Radio system - Premium VI (including Monsoon) from 12.01, On Board Diagnos...
13/2/2005
01-54
Table of selectable display group numbers
Display group
number
Designations
001
1 = Power supply voltage
2 = Active amplifier output: OK,
short or open circuit
3 = Telephone mute
4 = on or off
002
1 = Connection - LF speaker
2 = OK, short or open circuit
3 = Connection RF speaker
4 = OK, short or open circuit
003
1 = Connection - LR speaker
2 = OK, short or open circuit
3 = Connection RR speaker
4 = OK, short or open circuit
004
1 = Passive or active
2 = Antenna
3 = OK, short or open circuit
4 = Open
Continued on next page
Radio system - Premium VI (including Monsoon) from 12.01, On Board Diagnos...
13/2/2005
01-55
Display group
number
Designations
005
1 = CD changer installed (even
when not coded in radio)
2 = OK or not OK
3 = Open
4 = Open
Note:
After ending function 08 "Read Measuring Value
Block", check DTC memory (function 02)
Page
01-8
.
Radio system - Premium VI (including Monsoon) from 12.01, On Board Diagnos...
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст