Volkswagen Golf / Golf GTI / Jetta. Manual — part 1166
01-56
Multi-function steering
wheel through 11.01,
On Board Diagnostic
(OBD)
General information
The multi-function steering wheel
allows the various functions of the
radio and cruise control system to be
selected from the steering wheel.
The multi-function steering wheel is
comprised of the following
components:
Before troubleshooting or servicing,
technicians must be familiar with the
functions and operation specifics of
the applicable standard or optional
radio system and cruise control
system as controlled by the multi-
function steering wheel. Always read
the vehicle/radio owner's manual
and review all radio, tape player and
CD changer functions.
The On Board Diagnostic (OBD)
must be initiated at the
commencement of troubleshooting
and the stored information checked
with the VAG 1551/1552 scan tool or
VAS 5051 Vehicle Diagnostic,
Testing and Information system.
Note:
The following description and
illustrations deal specifically with the
VAG 1551 scan tool. VAG 1552 and
VAS 5051 procedures are similar.
The operating unit in steering
wheel with two sets of buttons on
left and right integrated
electronics.
The control module for the multi-
function steering wheel.
Multi-function steering wheel through 11.01, On Board Diagnostic (OBD)
13/2/2005
01-57
VAG 1551 Scan Tool (ST), connecting,
selecting functions and checking
control module versions
Prerequisites:
All fuses OK according to wiring diagram.
Battery (B+) voltage at least 9 Volts.
Notes:
VAG 1552 Scan Tool (ST) may be used instead
of the VAG 1551 Scan Tool (ST), however a
print-out is not possible.
The following procedure and display references
pertain only to VAG 1551 Scan Tool (ST).
Connecting
With ignition switched off, connect VAG 1551 Scan
Tool (ST) with adapter cable VAG 1551/3 to the
Data Link Connector (DLC) as follows:
- Remove cover for Data Link Connector (DLC)
under left instrument panel.
- Connect Scan Tool using adapter cable VAG
1551/3.
On Board Diagnostic (OBD)
HELP
1 - Rapid data transfer*
2 - Flash code output*
Indicated on display:
* Is displayed alternately
Multi-function steering wheel through 11.01, On Board Diagnostic (OBD)
13/2/2005
01-58
Functions, selecting
Notes:
If the display remains blank check Scan Tool
(ST) voltage supply according to wiring
diagram,
Electrical Wiring Diagrams, Troubleshooting and
Component Locations binder.
Additional operating instructions can be called
up by pressing the HELP button.
The
button is used to advance through the
program sequence.
In operating mode 1 "Rapid data transfer,"
function 00 "Automatic test sequence" can be
carried out. The DTC memory of all control
modules with OBD capability are checked
automatically.
- Switch on ignition.
- Switch on printer with the Print button (indicator
lamp in button lights up).
- Press button 1 for "Rapid data transfer" mode.
Rapid data transfer
HELP
Input address word XX
Indicated on display:
- Press buttons -1- and -6- to enter "Steering
wheel electronics" address word16.
Rapid data transfer
Q
16 Steering Wheel Electronics
Indicated on display:
- Confirm entry with Q button.
Rapid data transfer
Q
Tester sends address word 16
Indicated on display:
Multi-function steering wheel through 11.01, On Board Diagnostic (OBD)
13/2/2005
01-59
Check Control Module Versions
1J0907487 Steering wheel electron.x28
Coding 00008
WSC 00000
Indicated on display (example only):
Readout, top line
Readout, bottom line
CAUTION!
Part numbers are for reference
only. Always check with your
Parts Department for the latest
parts information.
1JO 907 487 = Control module
part number
Steering wheel electron. =
System designation
x28 = Software version
Coding 00008 = coding number
(dependant on control module
part number
Page 01-74
).
WSC 00000 = Workshop code
- Press
button.
Multi-function steering wheel through 11.01, On Board Diagnostic (OBD)
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст