Volkswagen Golf / Golf GTI / Jetta. Manual — part 824
01-73
Display
zone
Designation
Display
contents
Corrective action
1
Too high
Display changes to "correct"
Display remains on "too high"
Display changes to "correct"
Display remains on "too high"
Display changes to "too high"
- Pull igniter connector off airbag unit
- Fit igniter connector onto inert igniter on
VAS 5056B
Page 01-85
.
- Replace airbag unit
- Pull off connector between wiring harness
and coil connector with slip ring
- Connect test box VAS 5056B to driver's
circuit wiring harness instead of coil
connector with slip ring
Page 01-85
.
- Replace coil connector with slip ring
- Press button on VAS 5056B
- Replace wiring harness
Continued on next page
Airbag system, On Board Diagnostic (OBD)
13/2/2005
01-74
Display
zone
Designation
Display
contents
Corrective action
2
Igniter for airbag
(front passenger's)
-N131-
Correct
Trig.
Ground
Trig.
positive
Too low
Too high
No DTC's present
Display changes to "too high"
Display remains on "too low"
Display changes to "too low"
Display remains on "too high"
- Visual check of wiring
- Watch display and check connectors of
appropriate current circuit for correct
engagement and tight fit. If display
changes to "correct", erase DTC
memory
- Separate connector between wiring
harness and adapter cable to airbag unit
- Replace airbag unit
- Replace wiring harness
- Connect test box VAS 5056B to
passenger's circuit wiring harness
Page 01-85
.
- Press button on VAS 5056B
- Replace airbag unit
- Replace wiring harness
Airbag system, On Board Diagnostic (OBD)
13/2/2005
01-75
Display
zone
Designation
Display
contents
Corrective action
3
Igniter driver's belt
tensioner -N153-
1)
Correct
Too high
Too low
Trig.
Ground
Trig.
positive
not
installed
- Visual check of wiring
- Watch display and check connectors
of appropriate current circuit for correct
engagement and tight fit. If the display
changes to "correct", erase DTC
memory
- Replace driver's/front passenger's belt
tensioner
4
Igniter front
passenger's belt
tensioner -N154-
1)
Correct
Too high
Too low
Trig.
Ground
Trig.
positive
not
installed
1)
Only valid for vehicles with electrical seat belt tensioners, for vehicles with mechanical
seat belt tensioners the display indication has no meaning i.e. "not installed" will be
displayed.
Airbag system, On Board Diagnostic (OBD)
13/2/2005
01-76
Display group 003
Display group 003
Read Measuring Value
Block 3
Indicated on display
xxx
xxx
xxx
xxx
1
2
3
4
Display zones
Specification Evaluation
Right Front Seatbelt
Microswitch -F141
not installed
or
belt: yes
belt: no
Left Front Seatbelt Microswitch
-F140
not installed
or
belt: yes
belt: no
Front passenger's seat occupied
recognition
not installed
Voltage supply
correct
Page 01-
77
Airbag system, On Board Diagnostic (OBD)
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст