Volkswagen Golf / Golf GTI / Jetta. Manual — part 926
01-41
Climatronic Control Module -J255-,
coding (function 07)
Note:
Each replacement Climatronic control module -
J255- must be coded after installing.
Perform Basic setting (function: 04) after
coding.
The A/C control head - E87 flashes for 15
seconds when the control module -J255 has not
been coded.
If the appropriate vehicle code or the
appropriate equipment level is not displayed,
the control module must be coded as follows:
- Connect VAG 1551 Scan Tool (ST), enter
address word 08 "AC/Heating electronics" and
press
until "Select function XX" appears in
display
Page 01-8
.
Rapid data transfer
HELP
Select function XX
Indicated on display:
- Press buttons -0- and -7- to select function 07
Code control module.
Climatronic On Board Diagnostic (OBD) through m.y. 2001
13/2/2005
01-42
Rapid data transfer
Q
07 - Code control module
Indicated on display:
- Press -Q- button to confirm entry.
Coding control module
Q
Enter code number XXXXX
(0-32000)
Indicated on display:
- Using scan tool button pad, enter
code number and confirm entry
with -Q- button.
Coding For vehicles
01000
All USA/CDN
Coding control module
Q
Enter code number 01000
(0-32000)
Indicated on display:
- Press -Q- button to confirm entry.
3B1 907 044 A
SXX
Coding 01000
WSC XXXXX
The VAG 1551 Scan Tool (ST)
display will show the control module
coding and the part number.
- Press
button.
Rapid data transfer
HELP
Select function XX
Indicated on display:
Note:
The code entered and shown on the
display will not be loaded into the
Climatronic control module until the
ignition has been switched off once.
- Select End output (function 06)
Page 01-40
Climatronic On Board Diagnostic (OBD) through m.y. 2001
13/2/2005
01-43
Read Measuring Value Block (function
08)
Notes:
During the function Read measuring value
block, the Climatronic regulation is in operation.
8 display group numbers display up to 4
measuring values each.
To safely read measuring values while driving,
an assistant is required.
- Connect VAG 1551 Scan Tool (ST) and enter
address word "08 AC/Heating electronics" and
then press
button, until "Select function XX"
is shown in display
Page 01-8
.
Rapid data transfer
HELP
Select function XX
Indicated on display (function selection):
- Press buttons -0- and -8- to select function 08
Read measuring value block.
Rapid data transfer
Q
08 - Read measuring value block
Indicated on display:
- Press -Q- button to confirm entry.
Read measuring value block
Enter display group number XXX
Indicated on display:
- Using the 1551 button pad, enter the required
display group number (following example shows
display group 001).
Climatronic On Board Diagnostic (OBD) through m.y. 2001
13/2/2005
01-44
Read measuring value block
Q
Enter display group number 001
Indicated on display:
- Press -Q- button to confirm entry.
Read measuring value block
1
1
2
3
4
Indicated on display:
Notes:
Interpreting measured values in
individual display fields
tables
beginning on
Page 01-45
.
With the printer is switched on,
the information on the display will
be printed out.
After completing the Read
measuring value block function,
check DTC memory
Page 01-
12
If measured value specifications
are met in all display fields:
- Press
button.
Rapid data transfer
HELP
Select function XX
Indicated on display (function
selection):
Note:
To easily change between display
groups, proceed as follows:
Display
group
VAG
1551
VAG 1552
Higher
Press
button 3
Press
button
Lower
Press
button 1
Press
button
Skip
Press
button C
Press
button C
Climatronic On Board Diagnostic (OBD) through m.y. 2001
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст