Volkswagen Golf / Golf GTI / Jetta. Manual — part 1116
92-31
7 - Rear
Window
Wiper
Motor -
V12-
Removing
and
installing
Page
92-33
8 - Hex nut
M6
8 Nm
9 - Rubber
ring
10 - Spacer
11 - Wiper
blade
Removing
and
installing
wiper
rubber
Page 92-
13
Rear window wiper [amp] washer system
13/2/2005
92-32
Rear window wiper assembly,
removing and installing
Special tools and auxiliary items
needed
Wiper arm, removing
VAG 1331 Torque wrench (or
equivalent 5 - 50 Nm)
- Switch ignition on and briefly
operate rear wiper to bring rear
wiper to park position.
- Disconnect battery
Page 27-
39
.
- Fold open cover cap -1- and pull
off from wiper arm.
- Loosen nut -arrow-.
- Fold up wiper arm and rock back
and forth on shaft until it releases.
- Remove nut and remove wiper
arm.
Rear window wiper [amp] washer system
13/2/2005
92-33
Rear window wiper motor -V12-,
removing
- Remove inner, lower trim from
rear lid
Repair Manual, Body Interior,
Repair Group 70
Installing
Install in reverse order of removal,
noting the following:
- Disconnect electrical connection -
1- from wiper motor.
- Pull off hose -2- to washer jet.
- Remove nuts -arrows- and
remove wiper motor.
Ensure wiper shaft seal -arrow-
seats correctly in rear window.
- Reconnect battery
Page 27-
39
.
Rear window wiper [amp] washer system
13/2/2005
92-34
Wiper arm, installing
- Switch ignition on and briefly operate rear wiper
to bring rear wiper to park position.
- place wiper arm on shaft in approximate end
position.
- Install nut -arrow- and tighten by hand only.
- Set rear wiper rest position
Page 92-35
Rear window wiper [amp] washer system
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст