Volkswagen Golf / Golf GTI / Jetta. Manual — part 551

n

Supplementary set V.A.G 1459 B/2

n

Bell E-40

n

Press piece E-6-1

n

Press piece E-13-1

n

Thrust pad E-39

- Remove wheel.

- First remove drive axle

42-7, Rear drive axle, removing

and installing

.

- Remove bolts - 1 - from brake caliper and take off brake
caliper.

- Secure brake caliper to body.

- Remove phillips-head screw for brake disc and take out
brake disc.

- Disconnect ABS vehicle speed sensor from trail arm
housing.

Pressing out hub

Trailing arm and transverse links (all-wheel drive vehicles), assembly overview

- Install thrust disc - 1 - as shown in illustration.

1 - Thrust disc E-39 ; Position thrust disc so that it lies
completely on bolt heads 2 .

- Center assembly with clip E-76-2 .

1 - Piston cylinder HKZ-15 with hydraulic press piece E-0-
204-T

2 - Centering with clip E-76-2

Note:

n

Place engine/transmission jack V.A.G1383/A , or
similar, underneath to ensure safety (danger of
accident through falling parts when pressing out the
wheel hub).

Trailing arm and transverse links (all-wheel drive vehicles), assembly overview

- Install support - 1 - , piston cylinder - 2 - with pull rod - 3 -
and special nut - 4 - .

1 - Bell E-40

2 - Piston cylinder HKZ-15

3 - Removal rods E-0-217

4 - Special nut E-8-214

5 - High pressure hose with quick release coupling

6 - Thrust pad E-39

- Build-up pressure with foot pump.

- Check that all tools are correctly centered.

- Press wheel hub out through wheel bearing by operating
pump.

Pressing out wheel bearing

- Remove circlip - 1 - .

Trailing arm and transverse links (all-wheel drive vehicles), assembly overview

- Position thrust piece - 1 - on back of wheel bearing.

- Install piston cylinder - 2 - with pull rod - 3 - and special
tool - 4 - .

1 - Press piece E-5

2 - Piston cylinder HKZ-15

3 - Removal rods E-0-217

4 - Special nut E-8-214

5 - Bell E-44

- Build-up pressure with foot pump.

- Check that all tools are correctly centered.

- Press out wheel bearing by operating pump.

- Pull bearing inner race off from wheel hub.

Pressing in wheel bearing

- Position wheel bearing on wheel bearing housing.

Trailing arm and transverse links (all-wheel drive vehicles), assembly overview