Volkswagen Golf / Golf GTI / Jetta. Manual — part 764
7. B-pillar
8. Mounting clip
9. Steel Clip
Upper B-pillar trim, removing and installing
(Vehicles with side curtain protection 05.01
)
Note:
n
Removal and installation is described for right side of
vehicle. same instructions apply for removal and
installation for left-hand side.
Removing
- Remove cap - 1 - .
- Remove bolt - 2 - (40 Nm) and remove
belt relay - 3 - .
- Unclip emblem, airbag - 4 - using a small
screwdriver.
- Remove bolt - 5 - (2 Nm).
- Loosen lower B-pillar trim in upper area -
arrow A - .
Pillar and side trim
13/2/2005
- Loosen B-pillar trim - 6 - first at sides, n
in center of B-pillar - 7 - - arrowB - .
Installing
Pillar and side trim
13/2/2005
Installation is reverse of removal.
Note:
n
For safety, steel clips and upper B-
pillar trim must be replaced every
time trim panel of B-pillar is removed
on a vehicle with side curtain
airbags.
n
Steel clips and upper B-pillar trim
parts can no longer be ordered
separately for vehicles with side
curtain protection
⇒ parts catalog.
Upper B-pillar trim, assembly overview
(Vehicles without side curtain protection )
Pillar and side trim
13/2/2005
1. Upper B-pillar trim
¡
Removing
70-3, Upper B-
pillar trim, removing and
installing (Vehicles without
side curtain protection )
2. Lower B-pillar trim
3. Securing clip
4. B-pillar
5. Molded headliner
6. Cover cap
7. Belt relay
8. Bolt
¡
40 Nm
Pillar and side trim
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст